Ryobi BGH6110 User Manual download pdf (Page 4)

4 — English

 INSPECT TOOL CORDS PERIODICALLY. If

damaged, have repaired by a qualified service technician

at an authorized service facility. The conductor with insula-

tion having an outer surface that is green with or without

yellow stripes is the equipment-grounding conductor. If

repair or replacement of the electric cord or plug is neces-

sary, do not connect the equipment-grounding conductor

to a live terminal. Repair or replace a damaged or worn

cord immediately. Stay constantly aware of cord location

and keep it well away from the rotating grinding wheels.



INSPECT EXTENSION CORDS PERIODICALLY and

replace if damaged.



USE ONLY CORRECT WHEELS. DO NOT use wheels

with incorrect size holes. Never use wheel wash-

ers or wheel bolts that are defective or incorrect. The

maximum wheel capacity of your grinder is 6 in.

GENERAL SAFETY RULES

 NEVER TOUCH WHEEL or other moving parts during

use.

NEVER START A TOOL WHEN ANY ROTATING COM-

PONENT IS IN CONTACT WITH THE WORKPIECE.



DO NOT OPERATE A TOOL WHILE UNDER THE

INFLUENCE OF DRUGS, ALCOHOL, OR ANY

MEDICATION.



WHEN SERVICING use only identical replacement parts.

Use of any other parts may create a hazard or cause

product damage.



USE ONLY RECOMMENDED ACCESSORIES listed

in this manual or addendums. Use of accessories that

are not listed may cause the risk of personal injury.

Instructions for safe use of accessories are included

with the accessory.



DOUBLE CHECK ALL SETUPS. Make sure blade is

tight and not making contact with saw or workpiece

before connecting to power supply.

FIRMLY BOLT THE GRINDER TO A WORK BENCH OR

LEG STAND at approximately hip height.

NEVER reach to pick up a workpiece, a piece of scrap,

or anything else that is in or near the grinding path of the

wheel.

AVOID AWKWARD OPERATIONS AND HAND POSI-

TIONS where a sudden slip could cause your hand to

move into the wheel. ALWAYS make sure you have good

balance.

NEVER stand or have any part of your body in line with

the path of the wheel.

DO NOT TURN THE MOTOR SWITCH ON AND OFF

RAPIDLY. This could cause the wheel to loosen and could

create a hazard. Should this ever occur, stand clear and

allow the wheel to come to a complete stop. Disconnect

your grinder from the power supply and securely retighten

the wheel nut.

USE ONLY FLANGES furnished with this bench grinder.

IF ANY PART OF THIS GRINDER IS MISSING or should

break, bend, or fail in any way, or should any electrical

component fail to perform properly, shut off the power

switch, remove the machine plug from the power source

and have damaged, missing, or failed parts replaced

before resuming operation.

DO NOT OVERTIGHTEN THE WHEEL NUT. Excessive

tightening can cause the wheel to crack during operation.

ALWAYS USE THE GRINDER'S WHEEL GUARDS AND

SAFETY SHIELDS.

INSPECT GRINDING WHEEL for visible defects. Check

the wheel for fissures and cracks, and test for normal op-

eration prior to use. Replace cracked wheel immediately.

ADJUST distance between wheel and work rest to main-

tain 1/16 in. or less separation as the diameter of the

wheel decreases with use. The value of separation used

in the marking is to be the separation recommended by

the manufacturer but shall not be more than 1/8 in.

ALWAYS EASE THE WORKPIECE AGAINST THE

ABRASIVE WHEEL when starting to grind. A harsh

impact can break the wheel. Use light pressure when

starting to grind; too much pressure on a cold wheel

can cause the wheel to crack.

RISK OF INJURY DUE TO ACCIDENTAL STARTING.

Do not use in an area where children may be present.

NEVER START THE GRINDER when the wheel is in

contact with the workpiece.

SECURE WORK. Always hold workpiece firmly against

the work rest.

DO NOT USE THE BENCH GRINDER if the flange nut

or clamp nut is missing or if the spindle shaft is bent.

FREQUENTLY clean grinding dust from beneath grinder.

SPECIFIC SAFETY RULES

1 2 3 4 5 ... 40

Comments to this Manuals

No comments

Ryobi BGH6110 User Manual Page 4

Comments to this Manuals

Related products and manuals for Power tools Ryobi BGH6110