Ryobi BGH6110 User Manual download pdf (Page 3)

3 — English

GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to follow

all instructions listed below, may result in electric shock,

fire and/or serious personal injury.

READ ALL INSTRUCTIONS

 KNOW YOUR POWER TOOL. Read the operator’s

manual carefully. Learn the grinder’s applications and

limitations as well as the specific potential hazards related

to this tool.



GUARD AGAINST ELECTRICAL SHOCK BY PREVENT-

ING BODY CONTACT WITH GROUNDED SURFACES.

For example, pipes, radiators, ranges, refrigerator, enclo-

sures.



KEEP GUARDS IN PLACE and in good working order.



REMOVE ADJUSTING KEYS AND WRENCHES. Form

the habit of checking to see that keys and adjusting

wrenches are removed from tool before turning it on.



KEEP WORK AREA CLEAN. Cluttered areas and benches

invite accidents. DO NOT leave tools or pieces of wood

on the bench grinder while it is in operation.



DO NOT USE IN DANGEROUS ENVIRONMENTS. Do

not use power tools in damp or wet locations or expose

to rain. Keep the work area well lit.



KEEP CHILDREN AND VISITORS AWAY. All visi-

tors should wear safety glasses and be kept a safe

distance from work area. Do not let visitors contact

tool or extension cord while operating.



MAKE WORKSHOP CHILDPROOF with padlocks and

master switches, or by removing starter keys.



DON’T FORCE TOOL. It will do the job better and safer

at the feed rate for which it was designed.



USE RIGHT TOOL. Don't force the tool or attachment to

do a job it was not designed for. Don't use it for a purpose

not intended.



USE THE PROPER EXTENSION CORD. Make sure

your extension cord is in good condition. Use only a

cord heavy enough to carry the current your product will

draw. An undersized cord will cause a drop in line volt-

age resulting in loss of power and overheating. A wire

gauge size (A.W.G.) of at least 16 is recommended for an

extension cord 25 feet or less in length. If in doubt, use

the next heavier gauge. The smaller the gauge number,

the heavier the cord.



DRESS PROPERLY. Do not wear loose clothing, gloves,

neckties, or jewelry. They can get caught and draw you

into moving parts. Rubber gloves and nonskid footwear

are recommended when working outdoors. Also wear

protective hair covering to contain long hair.



ALWAYS WEAR SAFETY GLASSES WITH SIDE

SHIELDS. Everyday eyeglasses have only impact-

resistant lenses, they are NOT safety glasses.



SECURE WORK. Use clamps or a vise to hold work when

practical. It’s safer than using your hand and frees both

hands to operate tool.



DON’T OVERREACH. Keep proper footing and

balance at all times.



MAINTAIN TOOLS WITH CARE. Keep tools sharp

and clean for better and safer performance. Follow instruc-

tions for lubricating and changing accessories.



DISCONNECT TOOLS. When not in use, before

servicing, or when changing attachments, blades, bits,

cutters, etc., all tools should be disconnected.



AVOID ACCIDENTAL STARTING. Be sure switch is off

when plugging in any tool.



USE RECOMMENDED ACCESSORIES. Consult the

operator’s manual for recommended accessories. The

use of improper accessories may risk injury.



NEVER STAND ON TOOL. Serious injury could occur if

the tool is tipped or if the cutting tool is unintentionally

contacted.



CHECK DAMAGED PARTS. Before further use of the

tool, a guard or other part that is damaged should be

carefully checked to determine that it will operate properly

and perform its intended function. Check for alignment

of moving parts, binding of moving parts, breakage of

parts, mounting and any other conditions that may affect

its operation. A guard or other part that is damaged must

be properly repaired or replaced by an authorized service

center to avoid risk of personal injury.



NEVER LEAVE TOOL RUNNING UNATTENDED. TURN

THE POWER OFF.

 PROTECT YOUR LUNGS. Wear a face or dust mask if

the grinding operation is dusty.



PROTECT YOUR HEARING. Wear hearing protection

during extended periods of operation.



DO NOT ABUSE CORD. Never yank cord to disconnect

from receptacle. Keep cord away from heat, oil, and sharp

edges.



USE OUTDOOR EXTENSION CORDS. When tool

is used outdoors, use only extension cords with

approved ground connection that are intended for use

outdoors and so marked.

WHEELS COASTS AFTER BEING TURNED OFF.



NEVER USE IN AN EXPLOSIVE ATMOSPHERE.

Normal sparking of the motor could ignite fumes.



DO NOT USE TOOL IF SWITCH DOES NOT TURN IT

ON AND OFF. Have defective switches replaced by an

authorized service center.

1 2 3 4 ... 40

Comments to this Manuals

No comments

Ryobi BGH6110 User Manual Page 3

Comments to this Manuals

Related products and manuals for Power tools Ryobi BGH6110