Ryobi BGH6110 User Manual download pdf (Page 12)

12 — English

WARNING:

When servicing, use only identical Ryobi replacement

parts. Use of any other parts may create a hazard or

cause product damage.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes resulting in possible

serious injury.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use. Use

clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact

with plastic parts. Chemicals can damage, weaken or

destroy plastic which may result in serious personal injury.

LUBRICATION

All of the bearings in this tool are lubricated with a sufficient

amount of high grade lubricant for the life of the unit under

normal operating conditions. Therefore, no further lubrica-

tion is required.

MAINTENANCE

WHEEL REPLACEMENT

See Figure 12, page 16.

If you must replace a grinding wheel, be sure to obtain one

with a safe rated speed at least as high as the “no load

speed” RPM marked on the data plate of the grinder and

which is marked to comply with ANSI B7.1.

To replace the grinding wheel.

 Unplug the grinder.

 Remove the wheel cover by loosening the screws.

 Loosen the wheel nut in a clockwise direction for the left

side and a counterclockwise direction for the right side.

 Remove the outer flange and grinding wheel.

 To install a new grinding wheel, reverse the above pro-

cedure.

NOTE: Be sure the grinding wheel and outer flange are

properly seated on the spindle shaft.

WIRE WHEEL REPLACEMENT (NOT INCLUDED)

See Figure 13, page 16.

When replacing the grinding wheel with a wire wheel, it is

necessary to place a spacer on the spindle shaft BEFORE

installing the inner flange, wheel, outer flange, and wheel nut.

NOTE: FIGURES (ILLUSTRATIONS) START ON PAGE 13 AFTER

FRENCH AND SPANISH LANGUAGE SECTIONS.

1 ... 11 12 13 ... 40

Comments to this Manuals

No comments

Ryobi BGH6110 User Manual Page 12

Comments to this Manuals

Related products and manuals for Power tools Ryobi BGH6110