Ryobi HP214 User Manual download pdf (Page 9)

BIT

STORAGE

FEATURES

KNOW YOUR DRILL

See Figure 1.

The safe use of this product requires an understanding of

the information on the tool and in this operator’s manual as

well as a knowledge of the project you are attempting. Before

use of this product, familiarize yourself with all operating

features and safety rules.

BIT STORAGE

Bits provided with the drill can be placed in the storage

areas, located on the base of the drill.

DIRECTION OF ROTATION SELECTOR

(FORWARD/REVERSE/CENTER LOCK)

Your drill has a direction of rotation (forward/reverse/center

lock) selector located above the switch trigger for changing

the direction of bit rotation. Setting the switch trigger in the

OFF (center lock) position helps reduce the possibility of

accidental starting when not in use.

KEYLESS CHUCK

The keyless chuck allows you to hand-tighten or release the

drill bit in the chuck jaws.

MAGNETIC BIT HOLDER

The magnetic bit holder extends the reach of the bit and

holds the bit and screws until you are ready to drive them.

Storage is located on the front of the drill’s base.

MAG TRAY

™

The Mag Tray

™

conveniently stores screws or other small

parts.

QUICK MODE SELECTOR

The Quick Mode Selector allows you to quickly switch from

drive mode to drill mode.

TORQUE ADJUSTMENT RING

Your drill has a 24-position clutch. The torque adjustment

ring can be turned to select the right amount of torque for

your application.

TWO-SPEED GEAR TRAIN

The two-speed gear train is designed for drilling or driving

at LOW (1) or HIGH (2) speeds. A slide switch is located

on top of your drill for selecting either LOW (1) or HIGH (2)

speed.

VARIABLE SPEED

The variable speed switch trigger delivers higher speed

with increased trigger pressure and lower speed with

decreased trigger pressure.

ASSEMBLY

UNPACKING

This product has been shipped completely assembled.

 Carefully remove the tool and any accessories from the

box. Make sure that all items listed in the packing list are

included.

 Inspect the tool carefully to make sure no breakage or

damage occurred during shipping.

 Do not discard the packing material until you have

carefully inspected and satisfactorily operated the tool.

 If any parts are damaged or missing, please call

1-800-525-2579 for assistance.

PACKING LIST

Drill

Battery Packs (2)

Charger

Bits (2)

Magnetic Bit Holder

Operator’s Manual

WARNING:

If any parts are damaged or missing do not operate

this tool until the parts are replaced. Failure to heed this

warning could result in serious personal injury.

WARNING:

Do not attempt to modify this tool or create accessories

not recommended for use with this tool. Any such

alteration or modification is misuse and could result in a

hazardous condition leading to possible serious personal

injury.

WARNING:

To prevent accidental starting that could cause serious

personal injury, always remove the battery pack from the

tool when assembling parts.

1 2 3 4 5 6 7 8 9 10 ... 20

Comments to this Manuals

No comments

Ryobi HP214 User Manual Page 9

Comments to this Manuals

Related products and manuals for Power tools Ryobi HP214