Ryobi HP214 User Manual download pdf (Page 19)

MAINTENANCE

CHUCK REMOVAL

See Figures 18 - 20.

The chuck may be removed and replaced by a new one.

 Lock the switch trigger by placing the direction of rotation

selector in center position.

 Insert a 5/16 in. or larger hex key into the chuck of the

drill and tighten the chuck jaws securely.

 Tap the hex key sharply with a mallet in a clockwise

direction. This will loosen the screw in the chuck for easy

removal.

 Open the chuck jaws and remove the hex key. Using a

screwdriver, remove the chuck screw by turning it in a

clockwise direction.

NOTE: The chuck screw has left hand threads.

 Insert the hex key into the chuck and tighten the

chuck jaws securely. Tap sharply with a mallet in a

counterclockwise direction. This will loosen the chuck

on the spindle. It can now be unscrewed by hand.

TO RETIGHTEN A LOOSE CHUCK

The chuck may become loose on the spindle and develop a

wobble. Also, the chuck screw may become loose, causing

the chuck jaws to bind and prevent them from closing. To

tighten:

 Lock the switch trigger by placing the direction of rotation

selector in the center position.

 Open the chuck jaws.

 Insert the hex key into the chuck and tighten the chuck

jaws securely. Tap the hex key sharply with a mallet in

a clockwise direction. This will tighten the chuck on the

spindle.

 Open the chuck jaws and remove the hex key.

 Tighten the chuck screw.

Fig. 18

CHUCK

JAWS

MALLET

CHUCK

HEX KEY

SCREWDRIVER

MALLET

HEX KEY

Fig. 19

Fig. 20

1 ... 18 19 20

Comments to this Manuals

No comments

Ryobi HP214 User Manual Page 19

Comments to this Manuals

Related products and manuals for Power tools Ryobi HP214