Ryobi BE319 User Manual download pdf (Page 3)

3 - English

Hold power tool by insulated gripping surfaces,

because the belt may contact its own cord. Cutting

a “live” wire may make exposed metal parts of the tool

“live” and could give the operator an electric shock.

Know your power tool. Read operator’s manual

carefully. Learn its applications and limitations, as well

as the specific potential hazards related to this tool.

Following this rule will reduce the risk of electric shock,

fire, or serious injury.

Always wear eye protection with side shields marked

to comply with ANSI Z87.1. Following this rule will

reduce the risk of serious personal injury.

Protect your lungs. Wear a face or dust mask if the

operation is dusty. Following this rule will reduce the

risk of serious personal injury.

Protect your hearing. Wear hearing protection during

extended periods of operation. Following this rule will

reduce the risk of serious personal injury.

Inspect tool cords periodically and, if damaged, have

repaired at your nearest authorized service center.

Constantly stay aware of cord location. Following this

rule will reduce the risk of electric shock or fire.

Check damaged parts. Before further use of the

tool, a guard or other part that is damaged should

be carefully checked to determine that it will operate

properly and perform its intended function. Check for

alignment of moving parts, binding of moving parts,

breakage of parts, mounting, and any other conditions

that may affect its operation. A guard or other part that

is damaged should be properly repaired or replaced

by an authorized service center. Following this rule will

reduce the risk of shock, fire, or serious injury.

Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one

heavy enough to carry the current your product

will draw. A wire gauge size (A.W.G.) of at least

14 is recommended for an extension cord 50 feet

or less in length. A cord exceeding 100 feet is not

recommended. If in doubt, use the next heavier gauge.

The smaller the gauge number, the heavier the cord.

An undersized cord will cause a drop in line voltage

resulting in loss of power and overheating.

Inspect for and remove all nails from lumber before

using this tool. Following this rule will reduce the risk of

serious personal injury.

If the power supply cord is damaged, it must be

replaced only by the manufacturer or by an authorized

service center to avoid risk.

Save these instructions. Refer to them frequently and

use them to instruct others who may use this product.

If you loan someone this product, loan them these

instructions also.

GENERAL POWER TOOL SAFETY WARNINGS

BELT SANDER SAFETY WARNINGS

before use. Many accidents are caused by poorly

maintained power tools.

Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

SERVICE

Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

When servicing a power tool, use only identical re-

placement parts. Follow instructions in the Mainte-

nance section of this manual. Use of unauthorized parts

or failure to follow Maintenance instructions may create

a risk of shock or injury.

1 2 3 4 5 6 7 8 ... 31 32

Comments to this Manuals

No comments

Ryobi BE319 User Manual Page 3

Comments to this Manuals

Related products and manuals for Power tools Ryobi BE319