Ryobi ts1341 User Manual download pdf (Page 18)

ASSEMBLY

SQUARING THE SAW BLADE TO THE FENCE

See Figures 16 - 20

n Unplug the saw.

n Pull the saw arm all the way down and engage the lock

pin to hold the saw arm in transport position.

n Loosen the miter lock handle approximately one-half

turn.

n Depress the miter lock plate and rotate the miter table

until the pointer on the control arm is positioned at 0

n Release the miter lock plate and securely tighten the miter

lock handle.

n Lay a framing square flat on the miter table. Place one

leg of the square against the fence. Slide the other leg

of the square against the flat part of saw blade.

NOTE: Make sure that the square contacts the flat part

of the saw blade, not the blade teeth.

n The edge of the square and the saw blade should be

parallel as shown in figure 17.

n If the front or back edge of the saw blade angles away

from the square as shown in figures 18 and 19, adjust-

ments are needed.

n Loosen the socket head screws that secure the miter

fence to the miter table.

n Rotate the miter fence left or right until the saw blade is

parallel with the square.

n Retighten the screws securely and recheck the blade-to-

fence alignment.

The saw has two scale indicators, one on the bevel scale

and one on the miter scale. After squaring adjustments have

been made, it may be necessary to loosen the indicator

screws and reset them to zero.

Fig. 17

Fig. 18

Fig. 16

Fig. 19

FENCE

SOCKET HEAD

SCREW(S)

SOCKET HEAD

SCREW(S)

VIEW OF BLADE SQUARE WITH FENCE

VIEW OF BLADE NOT SQUARE WITH FENCE,

ADJUSTMENTS ARE REQUIRED

VIEW OF BLADE NOT SQUARE WITH FENCE,

ADJUSTMENTS ARE REQUIRED

MITER

LOCK HANDLE

MITER

TABLE

BLADE

MITER

LOCK

PLATE

FRAMING

SQUARE

MITER

FENCE

MITER

LOCK HANDLE

MITER

TABLE

BLADE

MITER

LOCK

PLATE

FRAMING

SQUARE

MITER

FENCE

MITER

LOCK HANDLE

MITER

TABLE

BLADE

MITER

LOCK

PLATE

FRAMING

SQUARE

MITER

FENCE

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Comments to this Manuals

No comments

Ryobi ts1341 User Manual Page 18

Comments to this Manuals

Related products and manuals for Mitre saws Ryobi ts1341