Ryobi ts1341 User Manual download pdf (Page 17)

ASSEMBLY

Fig. 13

WARNING:

Make sure the spindle lock button is not engaged

before reconnecting saw into power source. Never

engage spindle lock button when blade is rotating.

NOTE: Many of the illustrations in this manual show only

portions of the compound miter saw. This is intentional so that

we can clearly show points being made in the illustrations.

Never operate the saw without all guards securely in

place and in good operating condition.

SQUARING THE MITER TABLE TO THE

FENCE

See Figures 13 - 16.

n Unplug the saw.

n Push down on the saw arm and pull out the lock pin to

release the saw arm.

n Raise saw arm to its full raised position.

n Loosen the miter lock handle approximately one-half

turn.

n Depress the miter lock plate and rotate the miter table

until the pointer on the control arm is positioned at 0

n Release the miter lock plate and securely tighten the miter

lock handle.

n Lay a framing square flat on the miter table. Place one

leg of the square against the fence. Place the other leg

of the square beside the throat plate in the miter table.

The edge of the square and the throat plate in the miter

table should be parallel as shown in figure 13.

n If the edge of the framing square and the throat plate in

the miter table are not parallel as shown in figures 14 and

15, adjustments are needed.

n Using the blade wrench provided, loosen the socket head

screws securing the fence. Adjust the fence left or right

until the framing square and throat plate are parallel.

n Retighten the screws securely and recheck the fence-to-

table alignment.

Fig. 14

Fig. 15

VIEW OF MITER TABLE SQUARE WITH FENCE

VIEW OF MITER TABLE NOT SQUARE WITH FENCE,

ADJUSTMENTS ARE REQUIRED

VIEW OF MITER TABLE NOT SQUARE WITH FENCE,

ADJUSTMENTS ARE REQUIRED

MITER

LOCK PLATE

MITER

LOCK HANDLE

MITER

FENCE

MITER TABLE

THROAT PLATE

FRAMING

SQUARE

MITER

LOCK PLATE

MITER

FENCE

MITER TABLE

THROAT PLATE

FRAMING

SQUARE

MITER

LOCK PLATE

MITER

FENCE

MITER TABLE

THROAT PLATE

FRAMING

SQUARE

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

Comments to this Manuals

No comments

Ryobi ts1341 User Manual Page 17

Comments to this Manuals

Related products and manuals for Mitre saws Ryobi ts1341