Ryobi ts1341 User Manual download pdf (Page 11)

FEATURES

KNOW YOUR COMPOUND MITER SAW

See Figure 1.

Before attempting to use this product, familiarize yourself

with all operating features and safety rules.

15 AMP MOTOR

The saw has a powerful 15 amp motor with sufficient power

to handle tough cutting jobs. It is made with all ball

bearings, and has externally accessible brushes for ease

of servicing.

10 in. BLADE

A 10 in. blade is included with the compound miter saw. It

will cut materials up to 2 in. thick or 6 in. wide, depending

upon the angle at which the cut is being made.

BLADE WRENCH STORAGE

See Figure 1.

A blade wrench is packed with the saw. One end of the

wrench is a phillips screwdriver and the other end is a hex

key. Use the hex key end when installing or removing blade

and the phillips end when removing or loosening screws. A

storage area for the blade wrench is located in the saw’s

base.

CARRYING HANDLE

See Figure 2.

For convenience when carrying or transporting the miter

saw from one place to another, a carrying handle has been

provided on top of the saw arm. To transport, turn off and

unplug the saw, then lower the saw arm and lock it in the

down position. Lock saw arm by depressing the lock pin.

MITER LOCK HANDLE

See Figure 2.

The miter lock handle securely locks the saw at desired

miter angles.

SPINDLE LOCK BUTTON

See Figure 3.

The spindle lock button locks the spindle stopping the blade

from rotating. Depress and hold the lock button while install-

ing, changing, or removing blade.

SWITCH TRIGGER

See Figure 4.

To prevent unauthorized use of the compound miter saw,

disconnect it from the power supply and lock the switch in

the off position. To lock the switch, install a padlock (not

included) through the hole in the switch trigger. A lock with

a long shackle up to 9/32 in. diameter may be used. When

the lock is installed and locked, the switch is inoperable.

Store the padlock key in another location.

Fig. 3

Fig. 2

CARRYING

HANDLE

SAW ARM LOCKED IN DOWN POSITION

SAW

ARM

MITER LOCK

HANDLE

LOCK

SPINDLE

LOCK BUTTON

SWITCH

TRIGGER

PADLOCK

SWITCH

TRIGGER

Fig. 4

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Comments to this Manuals

No comments

Ryobi ts1341 User Manual Page 11

Comments to this Manuals

Related products and manuals for Mitre saws Ryobi ts1341