Ryobi CSB130JS Operator's Manual download pdf (Page 15)

Page 15

DUST NOZZLE (MODEL CSB 130JS)

See Figure 22.

A dust nozzle is included with saw Model CSB130JS. As

shown in figure 22, the dust nozzle fits over the dust chute

which is located on the rear of the upper blade guard.

Attach dust nozzle with a twisting motion. The easy rotation

of the dust nozzle allows the operator to direct the flow of

dust and chips. The dust and chip opening

should always

be turned away from the operator.

TO POCKET CUT

See Figure 23.

WARNING:

Always adjust bevel setting to zero before making a

pocket cut. Attempting a pocket cut at any other setting

can result in loss of control of your saw possibly causing

serious injury.

Adjust the bevel setting to zero, set blade to correct blade

depth setting, and swing the lower blade guard up using the

lower blade guard handle. ALWAYS RAISE THE LOWER

BLADE GUARD WITH THE HANDLE TO AVOID SERIOUS

INJURY. While holding lower blade guard by the handle,

firmly rest the front of the base flat against the workpiece

with the rear of the handle raised so the blade does not

touch the work.

See Figure 23.

Depress the switch trigger.

ALWAYS LET THE BLADE REACH FULL SPEED, THEN

SLOWLY LOWER BLADE INTO THE WORK UNTIL BASE

IS FLAT AGAINST WORK. After you complete your cut,

release the trigger and allow the blade to come to a complete

stop. After the blade has stopped, remove it from the work.

Then, corners may be cleared out with a hand saw or sabre

saw.

WARNING:

Never tie the lower blade guard in a raised position.

Leaving the blade exposed could lead to serious injury.

WARNING:

Do not use this product as a component of other products.

Also, do not use attachments or accessories not

recommended for use with this product. Any such use

could result in possible serious personal injury.

OPERATION

DUST

NOZZLE

Fig. 22

Fig. 23

DUST

CHUTE

UPPER

BLADE GUARD

MODEL CSB130JS

LOWER BLADE

GUARD

POCKET CUT

LOWER BLADE

GUARD HANDLE

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Comments to this Manuals

No comments

Ryobi CSB130JS Operator's Manual Page 15

Comments to this Manuals

Related products and manuals for Circular saws Ryobi CSB130JS