Ryobi CSB130JS Operator's Manual download pdf (Page 11)

Page 11

OPERATION

NEVER PLACE YOUR SAW ON THAT PART OF THE

WORK THAT WILL FALL OFF WHEN THE CUT IS MADE.

See Figure 12.

Keep the cord away from cutting area. ALWAYS place the

cord to prevent it from hanging up on the work while making

a cut. Utilize the cord clip to help prevent cord problems.

See Figure 13.

DANGER:

If the cord hangs up on the work during a cut, release the

switch trigger immediately. Unplug your saw and reposition

the cord to prevent it from hanging up again.

DANGER:

Using your saw with a damaged cord will result in serious

injury or death. If the cord has been damaged, have it

replaced before using your saw again.

Hold your saw firmly with both hands.

See Figure 14.

ALWAYS let the blade reach full speed, then guide your

saw into the work.

WARNING:

The blade coming in contact with the work before it

reaches full speed could cause your saw to "kickback"

toward you resulting in serious injury.en pressure. F

When making a cut, use steady, even pressure. Forcing

causes rough cuts, could shorten the life of your saw, and

could cause kickback.

REMEMBER: When sawing through work, the lower blade

guard does not cover the blade, exposing it on the

underside of work. Keep your hands and fingers away

from the cutting area.

After you complete your cut, release the trigger and allow

the blade to come to a complete stop. DO NOT REMOVE

YOUR SAW FROM WORKPIECE WHILE THE BLADE IS

MOVING.

Fig. 12

Fig. 13

Fig. 14

WRONG

CORD

CLIP

RIGHT

CAUTION:

When lifting your saw from the work, the blade is exposed

on the underside of your saw until the lower blade

guard closes. Make sure lower blade guard is closed

before setting your saw down on work surface. Failure

to do so may result in serious personal injury.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Comments to this Manuals

No comments

Ryobi CSB130JS Operator's Manual Page 11

Comments to this Manuals

Related products and manuals for Circular saws Ryobi CSB130JS