Ryobi RYI2200G User Manual download pdf (Page 14)

10 — English

FEATURES

KNOW YOUR GENERATOR

See Figure 1.

The safe use of this product requires an understanding of the

information on the product and in this operator’s manual as

well as a knowledge of the project you are attempting. Before

use of this product, familiarize yourself with all operating

features and safety rules.

120 V AC RECEPTACLES

Your generator has two single phase, 60 Hz outlets that are

120 Volt AC, 20 Amp receptacles. These can be used for

operating appropriate appliances, electrical lighting, tools,

and motor loads.

AIR FILTERS

The air filters help to limit the amount of dirt and dust drawn

into the unit during operation.

AUTO IDLE SWITCH

The auto idle switch is used to control the speed of the

engine and conserve fuel. When the switch is in the ON (I)

position and no appliances are connected to the unit, the

engine will idle. If an appliance is added, the engine speed

will increase to power the item. If the appliance is removed,

the engine will return to idle.

BATTERY CHARGING CABLE

The battery charging cable makes it easy to charge 12 Volt

lead acid batteries with the generator.

NOTE: Only use battery charging cable to charge vented

wet lead acid batteries.

CARRY HANDLES

The generator is equipped with two carry handles for

easy transport. Both handles should be used to carry the

generator.

DC CIRCUIT BREAKER

The circuit breaker is provided to protect the generator

against electrical overload.

DC RECEPTACLE

Your generator has a 12 volt, 7.5 Amp DC receptacle for

charging lead acid batteries.

ENGINE/CHOKE LEVER/ON-OFF SWITCH/

FUEL VALVE LEVER

The engine/choke lever/ on-off switch/fuel valve lever is used

when starting, stopping, and running the engine.

WARNING:

The 12 V DC receptacle is designed to charge vented wet

lead acid batteries only. Other types of batteries could

burst, causing personal injury and damage.

FUEL TANK

The fuel tank has a capacity of 1.0 gallon.

GROUND TERMINAL

The ground terminal is used to assist in properly ground-

ing the generator to help protect against electrical shock.

Consult with a local electrician for grounding requirements

in your area.

LED DISPLAY

LEDs provide feedback to indicate whether the generator is

in use, overloaded, or in need of lubricant.

OIL CAP/DIPSTICK

Remove the oil fill cap to check and add lubricant to the

generator when necessary.

PARALLEL KIT TERMINALS

The non-polarized parallel kit terminals are used with a

parallel kit (sold separately) that will allow generators to be

linked together to increase output.

NOTE: Read and understand the parallel kit’s instructions

prior to use. Kit is for usage with this unit only.

RESET BUTTON

The reset button is used to restore power if an overload

occurs. To restore power, depress the reset button.

RETRACTABLE HANDLE

The generator is equipped with a retractable handle that can

be adjusted for storage and transportation.

STARTER GRIP AND ROPE

The starter grip and rope is used (along with the engine/

choke lever) to start the generator’s engine.

PRODUCT SPECIFICATIONS

ENGINE

Engine Type ......................... Single Overhead Cam (SOHC)

Spark Plug ............................................... NHSP LD A7RTC

Engine Lubricant Volume.......................................13.52 oz.

GENERATOR

Rated Voltage .........................................120 V AC/12 V DC

Rated Amps .............................................15 A AC/7.5 A DC

Rated Running Watts ............................................. 1,800 W

Starting Watts ......................................................... 2,200 W

Rated Frequency ........................................................ 60 Hz

1 ... 13 14 15 ... 64

Comments to this Manuals

No comments

Ryobi RYI2200G User Manual Page 14

Comments to this Manuals

Related products and manuals for Generators Ryobi RYI2200G