Ryobi FPR3000 User Manual download pdf

how to get started

WARNING: This How To Get Started sheet is

not a substitute for reading the operator’s manual.

To reduce the risk of injury or property damage, user

must read and understand operator’s manual before

using this product.

Insert paint container lid onto paint can.

Insert paint can into unit.

Turn the dual control knob counterclockwise to choose one person

operation.

Attach the paint tube to the quick-connect main outlet on unit.

Attach roller to handle.

Attach the other end of the paint tube to the quick connect outlet on the

handle.

Plug in the unit, place the forward/reverse switch in the forward position,

and turn the machine on.

Squeeze and hold the trigger on the roller handle to get paint flowing

through the paint tube.

Test the roller on a scrap surface before beginning.

Adjust the variable paint flow valve for desired paint coverage.

When finished, clean all parts before storing.

For detailed instructions on how to

perform any of the steps at right,

please see the operator’s manual.

987000-758

5-28-09 (REV:00)

For set-up when using the finish sprayer

or for two-person operation, please see

the operator’s manual.

1 2

how to get started WARNING: This How To Get Started sheet is not a substitute for reading the operator’s manual. To reduce the risk of injury or

Page 2

PoUr dÉBUter L’UtILIsatIoN dU ProdUIt AVERTISSEMENT : Le présent feuillet intitulé « Pour débuter l’utilisation du produit » ne remplace en aucu

Ryobi FPR3000 User Manual