Ryobi RY43160 Operator's Manual download pdf (Page 11)

Page 11 — English

Fig. 3

CONNECTING THE POLES

See Figure 3.

Before using the pole saw, a one-time assembly is

required. When removed from the box, the three

poles are connected by an electrical cord as shown

above.

 Remove the four (4) rubber cord protectors from

inside the poles. This material protects the cord

during shipping and MUST be discarded imme-

diately.

 Unscrew the lower collar from the threaded base

on the intermediate pole and push back over the

cord to the handle pole shaft as shown.

 Insert the handle pole into the intermediate pole

and slide together until you hear the button click.

The tubes are egg-shaped and will only install one

way.

 Lower the collar on the handle pole to the threaded

base on the intermediate pole and rotate clock-

wise to secure.

 Repeat this process to attach the intermediate

pole to the powerhead pole.

NOTE: Once assembled correctly, handle pole and

powerhead pole should not be able to separate from

intermediate pole when pulled. Repeat above steps

if poles can be separated from intermediate pole.

WARNING:

Failure to lock powerhead pole as directed above

could result in serious injury or death.

HANDLE POLE

INTERMEDIATE

POLE

THREADED BASE

LOWER COLLAR

THREADED

BASE

POWERHEAD POLE

UPPER COLLAR

CORD

BUTTON

ASSEMBLY

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Comments to this Manuals

No comments

Ryobi RY43160 Operator's Manual Page 11

Comments to this Manuals

Related products and manuals for Power tools Ryobi RY43160