This new drill has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and operator safety. When properly
10UNLOCK®UNLOCKFORWARDSELECTORFig. 3REVERSEThis tool has the feature of being reversible. The direction of rotation is controlled by a selector locate
11ADJUSTABLE TORQUE CLUTCH Your drill is equipped with an adjustable torque clutch for driving different types of screws into different materials. The
12UNLOCK WARNING:Be prepared for binding or bit breakthrough. When these situations occur, drill has a tendency to grab and kick opposite to
13UNLOCKCHUCK REMOVALSee Figures 10, 11, and 12.Whenever necessary to remove the chuck for replace-ment, etc. use the following procedure for c
14Electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject to accel-erated wear and possible prema
15RYOBI 3/8 in. (10 mm) DRILL-DRIVER – MODEL NO. D45CKThe model number will be found on a plate attached to the motor housing. Always mention the mode
983000-473
2n Introduction ...
3WARNING:Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious pers
4WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer,
5SYMBOLSSome of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-tion of these symbols wil
6 WARNING: WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand co
7DOUBLE INSULATIONDouble insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power
8KNOW YOUR DRILL-DRIVERSee Figure 1.Before attempting to operate your drill-driver, familiarize yourself with all operating features and safety requir
9®UNLOCK WARNING:If any parts are missing, do not operate your drill-driver until the missing parts are replaced. Failure to do so could result
Comments to this Manuals