Ryobi RP4010 User Manual download pdf

OPERATOR’S MANUAL

Tek4® Lithium-ion

4V Laser Distance Measure

RP4010

WARNING:

READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed

below, may result in electric shock, fire and/or serious personal injury.

CAUTION:

Use of controls or adjustments or perfor mance of procedures other than those speci-

fied herein may result in hazardous radiation exposure.

The laser guide radiation used in the laser distance measure attachment is Class

II with < 1mW and 630-660nm wavelengths.

Avoid direct eye exposure when using the laser and do not project the laser beam

directly into the eyes of others. Serious eye injury could result.

Do not remove or deface any prod uct labels. Removing product labels increases

the risk of exposure to laser radiation.

Do not place the instrument in a position that may cause anyone to stare into

the laser beam intentionally or unintention ally. Serious eye injury could result.

Do not operate the laser distance measure around children or allow children to

operate the tool. Serious eye injury could result.

Always turn the laser distance measure off when not in use. Leaving the tool on

increases the risk of someone inadvertently staring into the laser beam.

 Use the laser distance measure only as a measurement device.

Do not operate the instrument in com bustible areas such as in the presence of

flammable liquids, gasses, or dust.

Always ensure the laser beam is aimed at a surface without reflective proper ties.

Shiny reflective materials are not suitable for laser use.

 The laser shall be used and maintained in accordance with the manufacturer’s

instructions.

 Neveraimthebeamatapersonorobjectotherthanthetargetsurface.

This product should not be used without the battery cover installed.

Handle the instrument with care. Treat it as you would any other optical device such

as a camera or binoculars.

Avoid exposing the instrument to shock, continuous vibration, or extreme hot or

cold temperatures. Damage to the product and/or serious injury to the user could

result.

Use battery only with charger listed.

MODEL BATTERY PACK CHARGER

RP4010 AP4001 AP4700, AP4500

Do not use on a ladder or unstable support. Stable footing on a solid surface enables

better control of the product in unexpected situations.

Do not use the product if the switch does not turn it on and off.

Use the product in accordance with these instructions and in the manner intended

for the product, taking into account the working conditions and the work to be

performed. Use of the product for operations different from those intended could

result in a hazardous situation.

Recharge only with the charger specified by the manufacturer. A charger that is

suitable for one type of battery pack may create a risk of fire when used with another

battery pack.

Use battery products only with specifically designated battery packs. Use of any

other battery packs may create a risk of injury and fire.

When servicing a battery product, use only identical replacement parts. Follow

instructions in the Maintenance section of this manual. Use of unauthorized parts

or failure to follow Maintenance instructions may create a risk of shock or injury.

Know your battery product. Read operator’s manual carefully. Learn its

applications and limitations, as well as the specific potential hazards related to

this battery product. Following this rule will reduce the risk of electric shock, fire, or

serious injury.

IMPORTANT SAFETY INSTRUCTIONS

Do not place battery products or their batteries near fire or heat. This will reduce

the risk of explosion and possibly injury.

 Do not crush, drop or damage battery pack. Do not use a battery pack or charger

that has been dropped or received a sharp blow. A damaged battery is subject to

explosion. Properly dispose of a dropped or damaged battery immediately.

Batteries can explode in the presence of a source of ignition, such as a pilot

light. To reduce the risk of serious personal injury, never use any cordless product in

the presence of open flame. An exploded battery can propel debris and chemicals. If

exposed, flush with water immediately.

Do not charge battery tool in a damp or wet location. Following this rule will reduce

the risk of electric shock.

For best results, your battery tool should be charged in a location where the

temperature is more than 50°F but less than 94°F. To reduce the risk of serious

personal injury, do not store outside or in vehicles.

Under extreme usage or temperature conditions, battery leakage may occur. If

liquid comes in contact with your skin, wash immediately with soap and water.

If liquid gets into your eyes, flush them with clean water for at least 10 minutes,

then seek immediate medical attention. Following this rule will reduce the risk of

serious personal injury.

Save these instructions. Refer to them frequently and use them to instruct others

who may use this product. If you loan someone this instrument, loan them these

instructions also.

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associ-

ated with the product.

SYMBOL / SIGNAL

MEANING

DANGER:

Indicates an imminently hazardous situation, which, if not avoided,

will result in death or serious injury.

WARNING:

Indicates a potentially hazardous situation, which, if not avoided,

could result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided,

may result in minor or moderate injury.

CAUTION:

(Without Safety Alert Symbol) Indicates a situation that may result

in property damage.

Some of the following symbols may be used on this product. Please study them and learn

their meaning. Proper interpretation of these symbols will allow you to operate the tool

better and safer.

SYMBOL / NAME DESIGNATION/ EXPLANATION

Safety Alert Indicates a potential personal injury hazard.

V Volt Voltage

Hz Hertz Frequency (cycles per second)

W Watt Power

Direct Current

Type or a characteristic of current

Laser Exposure Laser radiation - avoid direct eye exposure.

Read The

Operator’s

Manual

To reduce the risk of injury, user must read and

understand operator’s manual before using this

product.

Wet

Conditions Alert

Do not expose to rain or use in damp locations.

Recycle

Symbols

This product uses lithium-ion (Li-ion) batteries. Local,

state or federal laws may prohibit disposal of batteries

in ordinary trash. Consult your local waste authority

for information regarding available recycling and/or

disposal options.

1 2 ... 16

Summary of Contents

Page 1 - IMPORTANT SAFETY INSTRUCTIONS

1OPERATOR’S MANUALTek4® Lithium-ion 4V Laser Distance Measure RP4010 WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructio

Page 2 - OPERATION

10DESEMPAQUETADOEmbarcamos este producto completamente armado. Extraiga cuidadosamente de la caja el cargador y los accesorios, si se incluyen. Asegú

Page 3 - OPERATION OPERATION

11CÓMO TOMAR MEDICIONESVea la figura 7, página 14.Medición de una sola distancia Oprima la tecla UNITS (UNIDADES) una vez para encender el láser.

Page 4 - TROUBLESHOOTING

12CALIFORNIA - PROPUESTA DE LEY NÚM. 65ADVERTENCIA: Este producto puede contener sustancias químicas (por ejemplo, plomo) reconoci-das por el estado d

Page 5 - CONCERNANT LA SÉCURITÉ

13A - LCD Display (afficheur ACL, pantalla de cristal líquido)B - ON/DIST (ON/DIST, ON/DIST)C - Plus (plus, más)D - Minus (moins, menos)E - Reference

Page 6 - UTILISATION

14A - First measurement (première mesure, primera medición)B - Second measurement (deuxième mesure, segunda medición)C - Summary line (ligne de résum

Page 7 - UTILISATION UTILISATION

153.16 in.2.1.16 in. 16 in.A - Timer key (touche du chronomètre, llave del cronómetro)Fig. 13 Fig. 15Fig. 14Fig. 16Measurement aMeasurement BMeasureme

Page 8

16REPLACEMENT PARTS: Prior to purchasing replacement parts, please obtain your model and serial number from the product data plate.MODEL NUMBER: ____

Page 9 - SIMBOLOS

2FEATURESPRODUCT SPECIFICATIONSBattery Pack Voltage ... 4 V

Page 10 - FUNCIONAMIENTO

3OPERATION OPERATIONUnits of Measure Press and hold the UNITS key. Continuously pressing and holding the key will dis-play the same measurement in m

Page 11 - FUNCIONAMIENTO FUNCIONAMIENTO

4CALIFORNIA PROPOSITION 65WARNING:This product may contain chemicals, including lead, known to the State of California to cause cancer, birth defects,

Page 12 - GARANTÍA

5 AVERTISSEMENT : LIRE TOUTES LES INSTRUCTIONS. Le non-respect de toutes les instructions ci-dessous peut entraîner un choc électrique, un incendie

Page 13

6CARACTÉRISTIQUESFICHE TECHNIQUETension du blocs-piles ...4 V c

Page 14 - VOLUME

7UTILISATION UTILISATION Appuyer une deuxième fois sur la touche et la tenir enfoncée pour prendre une mesure à partir de la patte d’arrêt dépliée

Page 15 - Fig. 13 Fig. 15Fig. 14

8UTILISATION DÉSACTIVATION DU SIGNAL SONOREVoir la figure 17, page 15. Appuyer simultanément sur les touches [ - ] et [ ] (Référence) et les t

Page 16 - MANUAL DEL OPERADOR

9MANUAL DEL OPERADORTek4® De iones de litio de 4v medidor de distancia láserRP4010 ADVERTENCIA: LEA TODAS LAS INSTRUCCIONES. El incumplimiento de las

Comments to this Manuals

No comments

Ryobi RP4010 User Manual

Browse online or download User Manual for Headphones Ryobi RP4010. Ryobi RP4010 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Headphones Ryobi RP4010