Ryobi RY29550 User Manual download pdf (Page 12)

8 — English

ASSEMBLY

WARNING:

Do not allow familiarity with this product to make you

careless. Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Always wear eye protection marked to comply with

ANSI Z87.1. Failure to do so could result in objects be-

ing thrown into your eyes, resulting in possible serious

injury.

WARNING:

Do not use any attachments or accessories not recom-

mended by the manufacturer of this product. The use of

attachments or accessories not recommended can result

in serious personal injury.

OPERATION

ATTACHING THE HANGER CAP

See Figure 3.

There are two ways to hang your attachment for storage.

To use the hanger cap, push in the button and place the

hanger cap over end of the lower end attachment shaft.

Slightly rotate the cap from side to side until the button

locks into place.

 The secondary hole in the attachment shaft can be used

for hanging purposes as well.

ATTACHING THE FRONT HANDLE

See Figure 4.

 Remove wing nut, washer, and bolt from the front

handle.

 Install the front handle onto the top side of the drive shaft

housing.

NOTE: The open side of the handle should face the

operator.

 Place the bolt through the front handle.

NOTE: The hex bolt head fits inside the hex recess molded

into one side of the handle.

 Reinstall the washer and wing nut.

 Tighten wing nut securely.

WARNING:

The line cutting blade on the grass deflector is sharp.

Avoid contact with the blade. Failure to avoid contact

can result in serious personal injury.

ATTACHING THE GRASS DEFLECTOR

See Figure 5.

 Remove the wing screw from the grass deflector.

 Insert the tab on the mounting bracket in the slot on the

grass deflector.

 Align the screw hole in the mounting bracket with the

screw hole in the grass deflector.

 Insert the wing screw through the mounting bracket and

into the grass deflector.

 Tighten the screw securely.

ATTACHING THE SHOULDER STRAP

See Figure 6.

Follow these steps to attach the shoulder strap.

 Connect the latch on the strap to the hanger bracket.

 Adjust the strap to a comfortable position.

FUELING AND REFUELING THE TRIMMER

FUEL MIXTURE

This product is powered by a 2-cycle engine and requires

pre-mixing gasoline and 2-cycle lubricant. Pre-mix unleaded

gasoline and 2-cycle engine lubricant in a clean 1 gallon

container approved for gasoline.

Recommended fuel: This engine is certified to operate on

unleaded gasoline intended for automotive use.

Mix a high quality 2-cycle engine lubricant at 2.6 oz. per

gallon (US).

Do not use automotive lubricant or 2-cycle outboard

lubricant.

DO NOT mix quantities larger than usable in a 30 day

period.

HIGH QUALITY 2-CYCLE ENGINE LUBRICANT

GASOLINE LUBRICANT

1 gallon (US) 2.6 oz.

1 liter 20 cc (20 ml)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

Comments to this Manuals

No comments

Ryobi RY29550 User Manual Page 12

Comments to this Manuals

Related products and manuals for Gardening equipment Ryobi RY29550