Ryobi 770rEB User Manual download pdf (Page 13)

OPERATING INSTRUCTIONS

2. While firmly holding the add-on, push it straight into

the Click-Link® coupler (Fig. 11).

NOTE: Aligning the release button with the guide recess

will help installation (Fig. 11).

3. Turn the knob clockwise to tighten (Fig. 12).

CAUTION: Lock the release button in the

primary hole and securely tighten the knob

before operating this unit.

OPERATING THE CLICK-LINK® SYSTEM

The Click-Link® system enables the use of these

optional add-ons.

Blower/Vacuum . . . . . . . . . . . . . . . . . . . . . . . . . . BV720r

Cultivator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GC720r

Hedge Trimmer . . . . . . . . . . . . . . . . . . . . . . . . . . HS720r

Snow Thrower . . . . . . . . . . . . . . . . . . . . . . . . . . . ST720r

Straight Shaft Trimmer . . . . . . . . . . . . . . . . . . . . SS725r

Tree Pruner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TP720r

Turbo Blower . . . . . . . . . . . . . . . . . . . . . . . . . . . . TB720r

WARNING: Read and understand operator’s

manual for add-on prior to operation.

Removing the Cutting Attachment or Add-Ons:

1. Turn the knob counterclockwise to loosen (Fig. 10).

2. Press and hold the release button (Fig. 10).

3. While firmly holding the upper shaft housing, pull the

cutting attachment or add-on straight out of the

Click-Link® coupler.

Installing the Cutting Attachment or Add-Ons:

WARNING: To avoid serious personal injury,

shut unit off before removing or installing

add-ons.

NOTE: To make installing or removing the add-on easier,

place the unit on the ground or on a work bench.

1. Turn the knob counterclockwise to loosen (Fig. 10).

Click-Link

Coupler

Release Button

Guide

Recess

Knob

Primary Hole

Upper Shaft

Housing

Lower Shaft

Housing

Release Button

90˚ Edging Hole

180˚ Edging

Hole

Knob

CAUTION: The cutting attachment and add-

ons with the Click-Link® system are to be

used in the primary hole unless stated other-

wise in the specific add-ons operator’s man-

ual. Using the wrong hole could lead to per-

sonal injury, or damage to the unit.

For edging when using the line head cutting attachment

with Click-Link® models, lock the release button of the

cutting attachment into the 90° edging hole or the 180°

edging hole(Fig. 12). The edger add-on should be

installed with the release button in the primary hole.

Fig. 10

Fig. 11

Fig. 12

Click-Link

Coupler

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Comments to this Manuals

No comments

Ryobi 770rEB User Manual Page 13

Comments to this Manuals

Related products and manuals for Gardening equipment Ryobi 770rEB