Ryobi JS480L Operator's Manual download pdf (Page 4)

4 — English

SPECIFIC SAFETY RULES

GENERAL SAFETY RULES

SERVICE

Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

WARNING!

To reduce the risk of injury, user must read instruction

manual.

When servicing a power tool, use only identical replace-

ment parts. Follow instructions in the Maintenance sec-

tion of this manual. Use of unauthorized parts or failure to

follow Maintenance instructions may create a risk of

shock or injury.

Hold power tools by insulated gripping surfaces when

performing an operation where the cutting tool may

contact hidden wiring or its own cord. Contact with a

“live” wire will make exposed metal parts of the tool “live”

and shock the operator.

Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding

the work by hand or against your body leaves it unstable

and may lead to loss of control.

Know your power tool. Read operator’s manual care-

fully. Learn its applications and limitations, as well as

the specific potential hazards related to this power

tool. Following this rule will reduce the risk of electric

shock, fire, or serious injury.

Always wear eye protection with side shields marked

to comply with ANSI Z87.1. Failure to do so could result

in objects being thrown into your eyes and other possible

serious injuries.

Protect your lungs. Wear a face or dust mask if the

operation is dusty. Following this rule will reduce the risk

of serious personal injury.

Protect your hearing. Wear hearing protection during

extended periods of operation. Following this rule will

reduce the risk of serious personal injury.

Inspect power tool cords periodically and, if damaged,

have repaired at your nearest Authorized Service Cen-

ter. Constantly stay aware of cord location. Following

this rule will reduce the risk of electric shock or fire.

Check damaged parts. Before further use of the power

tool, a guard or other part that is damaged should be

carefully checked to determine that it will operate

properly and perform its intended function. Check for

alignment of moving parts, binding of moving parts,

breakage of parts, mounting, and any other conditions

that may affect its operation. A guard or other part that

is damaged should be properly repaired or replaced

by an authorized service center. Following this rule will

reduce the risk of shock, fire, or serious injury.

Make sure your extension cord is in good condi-

tion. When using an extension cord, be sure to use

one heavy enough to carry the current your product

will draw. A wire gauge size (A.W.G.) of at least 16 is

recommended for an extension cord 50 feet or less

in length. A cord exceeding 100 feet is not recom-

mended. If in doubt, use the next heavier gauge. The

smaller the gauge number, the heavier the cord. An

undersized cord will cause a drop in line voltage resulting

in loss of power and overheating.

Inspect for and remove all nails from lumber before

using this power tool. Following this rule will reduce the

risk of serious personal injury.

If the power supply cord is damaged, it must be

replaced only by the manufacturer or by an authorized

service center to avoid risk.

Save these instructions. Refer to them frequently and

use them to instruct others who may use this product. If

you loan someone this product, loan them these instruc-

tions also.

1 2 3 4 5 ... 40

Comments to this Manuals

No comments

Ryobi JS480L Operator's Manual Page 4

Comments to this Manuals

Related products and manuals for Circular saws Ryobi JS480L