Ryobi P2101 Operator's Manual download pdf (Page 10)

8 — English

To install:

 Place the power switch in the OFF ( O ) position.

 Place the battery pack in the blower. Align raised rib on bat-

tery pack with groove in the blower’s battery port.

 Make sure the latches on each side of the battery pack snap

in place and that battery pack is secured in the blower before

beginning operation.

CAUTION:

When placing battery pack in the blower, be sure

raised rib on battery pack aligns with the back of

the blower and latches into place properly. Improper

installation of the battery pack can cause damage to internal

components.

To remove:

 Place the power switch in the OFF ( O ) position.

 Locate latches on side of battery pack and depress both

sides to release battery pack.

 Remove battery pack from the blower.

OPERATION

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts. Use

of any other parts may create a hazard or cause product

damage.

WARNING:

Always wear safety goggles or safety glasses with side

shields during power tool operation or when blowing dust.

If operation is dusty, also wear a dust mask.

WARNING:

To avoid serious personal injury, always remove the

battery pack from the product when cleaning or performing

any maintenance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics

are susceptible to damage from various types of commercial

solvents and may be damaged by their use. Use clean cloths

to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact

with plastic parts. Chemicals can damage, weaken or

destroy plastic which may result in serious personal injury.

Only the parts shown on the parts list are intended to be repaired

or replaced by the customer. All other parts should be replaced

at an Authorized Service Center.

STORAGE

 Clean all foreign material from the blower.

 Store indoors in a place that is inaccessible to children. Keep

away from corrosive agents such as garden chemicals and

de-icing salts.

BATTERY PACK REMOVAL AND PREPARATION

FOR RECYCLING

WARNING:

Upon removal, cover the battery pack’s terminals with heavy-

duty adhesive tape. Do not attempt to destroy or disassemble

battery pack or remove any of its components. Lithium-ion

and nickel-cadmium batteries must be recycled or disposed

of properly. Also, never touch both terminals with metal

objects and/or body parts as short circuit may result. Keep

away from children. Failure to comply with these warnings

could result in fire and/or serious injury.

OPERATING THE BLOWER

See Figure 5.

 To keep from scattering debris, blow around the outer edges

of a debris pile. Never blow directly into the center of a

pile.

 To reduce sound levels, limit the number of pieces of equip-

ment used at any one time.

 Use rakes and brooms to loosen debris before blowing. In

dusty conditions, slightly dampen surfaces when water is

available.

 Conserve water by using power blowers instead of hoses for

many lawn and garden applications, including areas such as

gutters, screens, patios, grills, porches, and gardens.

 Watch out for children, pets, open windows, or freshly

washed cars, and blow debris safely away.

 After using blowers or other equipment, CLEAN UP! Dispose

of debris properly.

WARNING:

Battery tools are always in operating condition. Therefore,

switch should always be in the OFF position when not in

use or carrying at your side.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Comments to this Manuals

No comments

Ryobi P2101 Operator's Manual Page 10

Comments to this Manuals

Related products and manuals for Air blowers/dryers Ryobi P2101