Ryobi AG700 User Manual download pdf (Page 6)

Protect your hearing. Wear hearing protection during

extended periods of operation. Following this rule will

reduce the risk of serious personal injury.

Inspect power tool cords periodically and, if damaged,

have repaired at your nearest Authorized Service Cen-

ter. Constantly stay aware of cord location. Following

this rule will reduce the risk of electric shock or fire.

Check damaged parts. Before further use of the power

tool, a guard or other part that is damaged should be

carefully checked to determine that it will operate

properly and perform its intended function. Check for

alignment of moving parts, binding of moving parts,

breakage of parts, mounting, and any other conditions

that may affect its operation. A guard or other part that

is damaged should be properly repaired or replaced

by an authorized service center. Following this rule will

reduce the risk of shock, fire, or serious injury.

Make sure your extension cord is in good condi-

tion. When using an extension cord, be sure to use

SPECIFIC SAFETY RULES

one heavy enough to carry the current your product

will draw. A wire gauge size (A.W.G.) of at least 14 is

recommended for an extension cord 50 feet or less

in length. A cord exceeding 100 feet is not recom-

mended. If in doubt, use the next heavier gauge. The

smaller the gauge number, the heavier the cord. An

undersized cord will cause a drop in line voltage resulting

in loss of power and overheating.

Inspect for and remove all nails from lumber before

using this power tool. Following this rule will reduce the

risk of serious personal injury.

 If the power supply cord is damaged, it must be replaced

only by the manufacturer or by an authorized service

center to avoid risk.

Save these instructions. Refer to them frequently and

use them to instruct others who may use this power tool.

If you loan someone this power tool, loan them these

instructions also.

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

No comments

Ryobi AG700 User Manual Page 6