Ryobi RY09056 User Manual download pdf (Page 14)

12 - English

TROUBLESHOOTING

IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM, CONTACT YOUR AUTHORIZED SERVICING DEALER.

PROBLEM CAUSE REMEDY

Engine fails to start. No fuel in tank.

Spark plug shorted or fouled.

Spark plug is broken. (cracked

porcelain or electrodes broken)

Ignition lead wire shorted, broken, or

disconnected from spark plug.

Ignition inoperative.

Fill tank.

Replace spark plug.

Replace lead wire or attach to spark

plug.

Contact authorized service center.

Engine hard to start. Water in gasoline or stale fuel mixture.

Too much lubricant in fuel mixture.

Engine is under or over choked.

Weak spark at spark plug.

Drain entire system and refill with fresh

fuel.

Drain and refill with correct mixture.

Adjust choke as necessary.

Contact authorized service center.

Engine lacks power. Air filter clogged. Clean air filter. Refer to Cleaning the

Air Filter earlier in this manual.

Engine overheats. Insufficient lubricant in fuel mixture. Mix fuel as described in starting

instructions.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 37 38

No comments

Ryobi RY09056 User Manual Page 14