Ryobi TS1141 User Manual download pdf (Page 11)

FEATURES

SPINDLE LOCK BUTTON

See Figure 3.

The spindle lock button locks the spindle stopping the

blade from rotating. Depress and hold the lock button while

installing, changing, or removing blade.

SWITCH TRIGGER

See Figure 4.

The saw will not start until you depress the switch lock with

your thumb then squeeze the switch trigger. To prevent

unauthorized use of the compound miter saw, disconnect it

from the power supply and lock the switch in the off position.

To lock the switch, install a padlock (not included) through

the hole in the switch trigger. A lock with a long shackle of

5/16 in. diameter may be used. When the lock is installed

and locked, the switch is inoperable. Store the padlock key

in another location.

The following tool (not included) is needed for making adjustments or installing the blade:

TOOLS NEEDED

Fig. 5

square

Fig. 4

padLock

switch

trigger

switch

Lock

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

No comments

Ryobi TS1141 User Manual Page 11