Ryobi P200 User Manual download pdf (Page 16)

16 17

OPERATION

SCREWDRIVING TORQUE ADJUSTMENT

(DRIVING POWER OF THE DRILL-DRIVER)

See Figure 13.

When using the drill-driver for various driving applications,

it becomes necessary to increase or decrease the torque

in order to help prevent the possibility of damaging screw

heads, threads, workpiece, etc. In general, torque intensity

should correspond to the screw diameter. If the torque is

too high or the screws too small, the screws may be dam-

aged or broken.

The torque is adjusted by rotating the torque adjustment

ring.

The torque is greater when the torque adjustment ring is

set on a higher setting. The torque is less when the torque

adjustment ring is set on a lower setting.

The proper setting depends on the type of material and the

size of screw you are using.

TO ADJUST TORQUE

�n Identify the twenty four torque indicator settings located

on the front of the drill.

n Rotate adjustment ring to the desired setting.

• 1 - 4 For driving small screws

• 5 - 8 For driving screws into soft material

• 9 - 12 For driving screws into soft and hard

materials

• 13 - 16 For driving screws in hard wood

• 17 - 20 For driving large screws

• 21 - For heavy drilling

Fig. 13

2 0

TO DECREASE

TORQUE

TO INCREASE

TORQUE

ADJUSTMENT

RING

1 ... 15 16 17 18 19 20

No comments

Ryobi P200 User Manual Page 16