SAVE THIS MANUAL FOR FUTURE REFERENCEYour drill has been engineered and manufactured to our high standard for dependability, ease of operation, and op
DIRECTION OF ROTATION SELECTOR(FORWARD/REVERSE)See Figure 2.The direction of bit rotation is reversible and is controlled by a selector lo
OPERATIONWARNING:Make sure to insert the drill bit straight into the chuck jaws. Do not insert the drill bit into the chuck jaws at an ang
OPERATIONADJUSTABLE TORQUE CLUTCHSee Figure 8.This product is equipped with an adjustable torque clutch for driving different
MAINTENANCEWARNING:When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause produc
MAINTENANCECHUCK REMOVAL See Figures 10 - 12.The chuck may be removed and replaced with a new one. Unplug the drill. Insert a 5/16 in
NOTES
983000-808D46C• Prior to requesting service or purchasing replacement parts, please obtain your model and serial num
TABLE OF CONTENTS Introduction ...
GENERAL SAFETY RULESWARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric
SERVICETool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel
SYMBOLSSome of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of th
The following signal words and meanings are intended to explain the levels of risk associated with this product.DANGER:Indicates an imminen
ELECTRICALEXTENSION CORDSWhen using a power tool at a considerable distance from a power source, be sure to use an extension cord that has
FEATURESPRODUCT SPECIFICATIONSChuck ......3/8 in.Switch ...
WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could r
Comments to this Manuals