Ryobi HP52L User Manual download pdf (Page 8)

8 — English

ADJUSTABLE TORQUE CLUTCH

This screwdriver is equipped with an adjustable torque clutch

for driving different types of screws into different materials.

The proper setting depends on the type of material and the

size of screw you are using.

ADJUSTING TORQUE

See Figure 6, page 9.

There are twenty-four torque indicator settings located on

the front of the screwdriver.

 Select the gear train setting to HI or LO speed.

 Rotate the adjusting ring to the desired setting.

• 1-4 Fordrivingsmallscrews(HI or LO speed)

• 5-8 Fordrivingscrewsintosoftmaterial

(LO speed)

• 9-12 Fordrivingscrewsintosoftandhard

materials (LO speed)

• 13-16 For driving screws into hard wood

(LO speed)

• 17-24 Fordrivinglargescrews

(LO speed)

OVERLOAD PROTECTION DEVICE

The tool has an overload protection device. The tool will

stop if the spindle is locked for several seconds while the

trigger is on. If this happens, release the trigger, then wait

for a few seconds before you resume operation. To avoid

this situation, do not force the tool.

LED WORKLIGHT

See Figure 7, page 9.

The screwdriver has a built-in LED worklight. This feature

is convenient when working in close or tight areas where

additional light is needed. Whenever the switch trigger is

depressed, the LED worklight will illuminate.

NOTE: The LED worklight will go off when overload protec-

tion causes the tool to stop. The light will come on again

when operation resumes.

OPERATION

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts.

Use of any other parts may create a hazard or cause

product damage.

WARNING:

Always wear eye protection marked to comply with ANSI

Z87.1 during maintenance. If operation is dusty, also wear

a dust mask.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use. Use

clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-

based products, penetrating oils, etc., come in contact

with plastic parts. Chemicals can damage, weaken or

destroy plastic which may result in serious personal

injury.

STORAGE

Before storing, always remove the battery pack from the

battery compartment.

BATTERY PACK PREPARATION FOR

RECYCLING

WARNING:

Upon removal, cover the battery pack’s terminals with

heavy-duty adhesive tape. Do not attempt to destroy or

disassemble battery pack or remove any of its compo-

nents. Lithium-ion batteries must be recycled or disposed

of properly. Also, never touch both terminals with metal

objects and/or body parts as short circuit may result.

Keep away from children. Failure to comply with these

warnings could result in fire and/or serious injury.

NOTE: FIGURES

(ILLUSTRATIONS) START ON

PAGE 9 AFTER FRENCH AND

SPANISH LANGUAGE SECTIONS.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comments to this Manuals

No comments

Ryobi HP52L User Manual Page 8

Comments to this Manuals

Related products and manuals for Software Ryobi HP52L