Ryobi A18MS01 User Manual

OPERATOR’S MANUALMITER SAW STAND A18MS01SAVE THIS MANUAL FOR FUTURE REFERENCEYour miter saw stand has been engineered and manufactured to Ryobi’s high

10 11OPERATIONUSING THE EXTENSION RAILSSee Figure 10.Use the extension rails when working with larger workpieces.To extend the rails:n Loosen t

10 11n Insert the 3/4 x 7-1/2 in. plywood strip horizontally be-tween the 6

RYOBI TECHNOLOGIES, INC.1428 Pearman Dairy Road, Anderson, SC 29625Post Office Box 1207, Anderson, SC 29622-1207Phone 1-800-525-2579www.ryobitools.com

2 3RULES FOR SAFE OPERATIONSafe operation of this accessory requires that you read and understand this operator’s manual, the operator’s manual for th

2 3SYMBOLSSome of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-tion of these symbols w

4 5The following signal words and meanings are intended to explain the levels of risk associated with thisproduct. SYMBOL SIGNAL MEANINGDANGER: WARN

4 5Fig. 2PREPARING THE STANDSee Figure 2.n Lay the stand’s top surface down on the floor with the folded legs on top. n Push in a leg locking pin and

6 7ASSEMBLING AND INSTALLING MATERIAL WORK SUPPORTSSee Figures 3 - 5.The material work supports help balance the workpiece during cutting opera

6 7Fig. 6MITER SAWSAW MOUNTINGBRACKETCARRIAGE BOLTFLAT WASHERNUTn Install carriage bolts as previously described.n After making sure both brackets are

8 9ASSEMBLYMOUNTING THE MITER SAW TO THE STANDSee Figures 8 - 9.Use the handles located at the rear of the mounting brackets to aid in installing or r

8 9Fig. 9ASSEMBLYLOWER LOCKING LEVERS TO SECURETO STANDOPERATIONWARNING: Do