Ryobi S652DG Operator's Manual download pdf (Page 7)

7 - English

FEATURES

PRODUCT SPECIFICATIONS

Size of Paper ........................................................1/4 Sheet

Motion ........................................................... Orbital Action

Orbit Diameter ......................................................... 1/16 in.

No Load Speed ...................................14,000 r/min. (RPM)

Input ................................ 120 V, AC only, 60 Hz, 2.0 Amps

ASSEMBLY

WARNING:

Do not use this product if it is not completely assembled

or if any parts appear to be missing or damaged. Use of

a product that is not properly and completely assembled

or with damaged or missing parts could result in serious

personal injury.

WARNING:

Do not attempt to modify this product or create acces-

sories or attachments not recommended for use with this

product. Any such alteration or modification is misuse

and could result in a hazardous condition leading to

possible serious personal injury.

If any parts are damaged or missing, please call 1-800-525-2579 for assistance. In Mexico, please call 01-800-843-1111.

OPERATION

WARNING:

Do not allow familiarity with this product to make you

careless. Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes resulting in possible

serious injury.

WARNING:

Do not use any attachments or accessories not

recommended by the manufacturer of this product. The

use of attachments or accessories not recommended

can result in serious personal injury.

APPLICATIONS

You may use this product for the purposes listed below:

Sanding on wood surfaces

Removing rust from and sanding steel surfaces

Sanding plastics

INSTALLING SANDPAPER

The cushion on the sander gives you the option of using

either non-adhesive sandpaper that clamps to the platen or

adhesive backed sandpaper with pressure sensitive adhesive

backing that sticks to the cushion.

INSTALLING NON-ADHESIVE SANDPAPER

See Figure 1, page 11.

Unplug the sander.

Inspect sandpaper before installing; do not use if broken

or defective.

If replacing sandpaper, remove old sandpaper. To remove

paper, release paper clamp by lifting up on lever, and

disengaging it from the tab on the platen.

Insert end of new 1/4 sheet sandpaper approximately

1/2 in. under the paper clamp.

NOTE: 1/2 in. clamping of sandpaper is necessary for

multi-sheet stacking of paper.

Lift up on paper clamp lever and lock into place. Apply

downward pressure to conform sandpaper to platen.

Wrap sandpaper around cushion. Lift lever on opposite

end of sander and insert loose end of sandpaper under

paper clamp. Fit sandpaper against cushion tightly.

Lift up on lever and lock into place.

1 2 3 4 5 6 7 8 ... 32

Comments to this Manuals

No comments

Ryobi S652DG Operator's Manual Page 7

Comments to this Manuals

Related products and manuals for Power sanders Ryobi S652DG