Ryobi RT501W Specifications download pdf (Page 20)

Table flatness adjustment

See Figure 24

Your router table comes equipped with 2 “L” brackets

mounted under it to help ensure the flatness of the

working surface. If the router table should ever become

warped, the flatness can be adjusted by shimming under

the “L” brackets. Loosen “L” brackets mounting screws

and place shims as necessary. Tighten the “L” bracket

screws securely. Check table top flatness with a

straightedge or the edge of a carpenters square.

Fig. 24

OPERATION

Connecting a Vacuum

A port is provided in the fence which will accept standard

1-1/4" and 2-1/2" vacuum hose connections. It works with

most shop vacuums. If the vacuum is plugged into the

switch box, it will turn ON and OFF simultaneously with

the router.

Assemble and using the Inserts

See Figure 25

Inserts help reduce the amount of wood chips and dust

that can accumulate on the router table. They can also

lend stability to the work piece.

Four inserts come with your router table. Three of the

inserts are for use with a specific size bit (refer to the

following chart).

Fig. 25

Insert Use

1. Select correct insert for the router bit and your

application.

2. To assemble to router table, press the insert into the

hole in the table, applying pressure to all sides equally.

This assures that insert snaps into place.

3. Remove an insert by placing your finger into the hole in

the center. With light pressure, pull up on the insert.

NOTE: Remove the router bit from the router before

attempting to remove an insert.

WARNING:

Before removing insert, switch box must be in OFF

position, router switch must be in OFF position and

power cord must be unplugged from outlet.

Diameter Diameter of Figure 25

of insert router bit Reference

to be used

1-1/8" 1" M

2-1/8" 2" N

2-7/8" 2-3/4" P

WARNING:

Do not use a router bit with a diameter greater than

3-1/2”. Consult your router manual for the maximum

size of router bit allowable.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Ryobi RT501W Specifications Page 20

Comments to this Manuals

Related products and manuals for Networking Ryobi RT501W