5
RBL36 RBL36B
Motor 36 Volt DC
Air Velocity 160km/h - 250 km/h
Measured sound
pressure level
L
PA
: 73.0 dB(A), K
PA
: 2 dB(A)
Measured sound
power level
L
WA
: 89.4 dB(A), K
WA
: 2 dB(A)
Vibration ah= 0.42 m/s
2
, K=1.5 m/s
2
Weight
3.27 kg
(with battery)
1.9 kg
(without battery)
Battery Pack BPL3626 not included
Charger BCL3620 not included
1. Handle
2. Variable speed trigger
3. Battery pack (For RBL36 only)
4. Battery latch button
5. Tube latch
6. Blower housing outlet
7. Blower tube
8. Nozzle tab
9. Blower tube outlet
10. High speed nozzle
See Figure 1.
The safe use of this product requires an understanding
of the information on the blower and in this operator’s
manual as well as a knowledge of the project you are
attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
The blower tube can be installed on the blower without
using any tools.
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from
the blower when assembling parts.
See Figure 2.
With the logo area facing up, slide the blower tube
over the outlet on the blower housing while pressing
down on the tube latch.
Slide blower tube over housing outlet until the tube
latch locks into place through the opening in the
blower tube.
For clearing wet leaves or heavier debris, install the
high speed nozzle by connecting it to the blower tube
outlet. Make sure the nozzle snaps over the nozzle tab
to secure it in place.
Do not allow familiarity with tools to make you careless.
Remember that a careless fraction of a second is
sufcient to inict serious injury.
You may use this tool for the purposes listed below:
Clearing hard surfaces such as driveways and
walkways.
Keeping driveways, garages, and decks free from
leaves, pine needles, and other small debris.
Not intended for use other than what is listed above.
To avoid serious personal injury, always remove
the battery pack and keep hands clear of the variable
speed trigger when carrying or transporting the tool.
See Figure 3.
Place the battery pack in the blower. Align raised rib
on battery pack with grooves in the blower’s battery
port.
Make sure the latch on bottom of the battery pack
snaps in place and that battery pack is secured in the
blower before beginning operation.
(20 pages)
(48 pages)
(1 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals