Ryobi VC120 User Manual download pdf (Page 9)

OPERATION

The dust bowl should be checked, emptied and cleaned

periodically to obtain maximum dust collection.

TO REMOVE DUST BOWL

See Figure 5.

■ Depress the release button located on top of hand

vac. Pull dust bowl down and out as shown to sepa-

rate from motor housing.

CLEANING YOUR HAND VAC

See Figures 5, 6 and 7.

WARNING:

Never use your hand vac without dust bowl and filter

properly in place.

■ Remove the filter by simply pulling it out of dust bowl.

See Figure 6

■ Shake or lightly brush any dust or dirt off filter.

■ Empty dust bowl and wash if necessary. Make sure

dust bowl is completely dry before reattaching to hand

vac.

TO REATTACH DUST BOWL

See Figure 7.

■ Position the two sections as shown. Align slots on

bottom of dust bowl with tabs on bottom of motor

housing then snap the two sections together.

Fig. 5

Fig. 6

Fig. 7

SLOTS

TABS

FILTER

DUST BOWL

HAND VAC

BATTERY PACK

PRESS RELEASE BUTTON

PULL DUST BOWL

DOWN AND OUT

TO REMOVE

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Ryobi VC120 User Manual Page 9