Ryobi SSP100 User Manual download pdf

how to get started

WARNING: This How To Get Started sheet is

not a substitute for reading the operator’s manual.

To reduce the risk of injury or property damage, user

must read and understand operator’s manual before

using this product.

Lubricate the piston.

Fill sprayer with paint/stain.

Choose proper spray tip.

Use the 1 in. round fan tip for

latex paints, oil-based paints,

and stains.

Use the 12 in. wide fan tip for

latex paints.

Plug in the sprayer.

Spray on scrap material to prime.

Paint as desired, keeping the tip of the sprayer

8 to 10 inches away from the surface.

Unplug the sprayer.

Return unused paint or stain to original container.

Clean sprayer.

For detailed instructions on how to perform any of

the steps below, please see the operator’s manual.

987000-761

5-26-09 (REV:00)

1 2

how to get started WARNING: This How To Get Started sheet is not a substitute for reading the operator’s manual. To reduce the risk of injury or

Page 2

PoUr dÉBUter L’UtILIsatIoN dU ProdUIt AVERTISSEMENT : Le présent feuillet intitulé « Pour débuter l’utilisation du produit » ne remplace en aucu

Ryobi SSP100 User Manual