Ryobi R10511 User Manual download pdf (Page 9)

Page 9

✒

OPERATION

Fig. 5

Fig. 4

WARNING:

If any parts are missing, do not operate tool until the

missing parts are replaced. Failure to do so could result

in possible serious personal injury.

SWITCH

See Figure 4.

Your drill starts and stops by depressing and releasing the

switch trigger. Release the switch trigger to turn drill OFF.

VARIABLE SPEED

See Figure 4.

Your drill has a variable speed feature in the switch. The

switch delivers higher speed and torque with increased

trigger pressure. Speed is controlled by the amount of

switch trigger depression.

SWITCH LOCK

See Figure 4.

The switch trigger can be locked in the OFF position. This

feature helps reduce the possibility of accidental starting

when not in use. To lock the switch trigger, place the direction

of rotation selector in the center position.

REVERSIBLE

See Figure 4.

This tool is reversible. The direction of rotation is controlled

by a direction of rotation selector located above the switch

trigger. With the drill held in normal operating position, the

direction of rotation selector should be positioned to the left

of the switch for drilling. The drilling direction is reversed

when the selector is to the right of the switch. When the

selector is in center position, the switch trigger is locked.

CAUTION:

To prevent gear damage, always allow chuck to come to

a complete stop before changing the direction of rotation.

To stop, release switch trigger and allow the chuck to come

to a complete stop.

WARNING:

Battery tools are always in operating condition. Therefore,

switch should always be locked when not in use or when

carrying at your side.

REVERSE

FORWARD

CENTER POSITION

(LOCK)

SWITCH

TRIGGER

DIRECTION OF

ROTATION SELECTOR

LO (1) SPEED

HI (2)

TWO SPEED

GEAR TRAIN

(LO-HI)

TWO SPEED GEAR TRAIN

See Figure 5.

Your drill has a two-speed gear train designed for drilling or

driving at LO (1) or HI (2) speeds. A slide switch is located

on top of your drill to select either LO (1) or HI (2) speed.

When using drill in the LO (1) speed range, speed will

decrease and unit will have more power and torque. When

using drill in the HI (2) speed range, speed will increase and

unit will have less power and torque. Use LO (1) speed for

high power and torque applications and HI (2) speed for

fast drilling or driving applications.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Ryobi R10511 User Manual Page 9

Comments to this Manuals

Related products and manuals for Tools Ryobi R10511