Ryobi HP24 Operator's Manual download pdf (Page 6)

Page 6

FEATURES

KNOW YOUR SCREWDRIVER

See Figure 1.

Before attempting to use your screwdriver, familiarize

yourself with all operating features and safety

requirements.

WARNING:

Carefully read through this entire operator's manual before

using your new screwdriver. Pay close attention to the

Rules For Safe Operation, Warnings and Cautions. If you

use your screwdriver properly and only for what it is

intended, you will enjoy years of safe, reliable service.

WARNING:

If any parts are missing, do not operate your screwdriver

until the missing parts are replaced. Failure to do so could

result in possible serious personal injury.

If any parts are damaged or missing, please call 1-800-

525-2579 for assistance.

SWITCH

Your screwdriver is equipped with a rocker type switch which

turns your screwdriver ON and OFF. This switch also controls

the forward and reverse feature. For driving screws, depress

front side of switch. For removing screws, depress back side

of switch.

WARNING:

Do not allow familiarity with your screwdriver to make you

careless. Remember that a careless fraction of a second

is sufficient to inflict severe injury.

SCREWDRIVER

BIT (INCLUDED)

COLLET

Fig. 1

TORQUE

ADJUSTMENT CAP

INPUT

JACK

REVERSE

FFORWARD

SWITCH

(0N/OFF)

(FORWARD/REVERSE)

The operation of any power tool can result in foreign objects being thrown into your eyes,

which can result in severe eye damage. Before beginning power tool operation, always wear

safety goggles or safety glasses with side shields and a full face shield when needed. We

recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with

side shields. Always use eye protection which is marked to comply with ANSI Z871.1.

WARNING:

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Ryobi HP24 Operator's Manual Page 6

Comments to this Manuals