Ryobi P236 Use and Care Manual download pdf (Page 9)

9 — English

OPERATION

INSTALLING/REMOVING BITS

See Figure 4, page 11.

The AUTO-LOAD CHUCK provides fast, easy one-handed

bit loading and ejecting.

The coupler has been designed to accept 1/4 in. hex bits.

To install:

 Lock switch trigger on the tool by placing the direction

of rotation selector in center position.

 Remove the battery pack from the tool.

 Push the bit into the coupler until it clicks into place.

 Pull on the bit to make sure it is secured in the coupler.

There may be some play in the installed bit; this is normal.

NOTE: Use only impact quality bits with a locking groove.

WARNING:

Make sure the bit is secured in the coupler before using

the impact driver. Failure to do so could cause serious

personal injury.

To remove:

Lock the switch trigger by placing the direction of

rotation selector in the center position.

 Remove the battery pack from the impact driver.

 With the nose of the tool pointed away from you, pull the

coupler away from the driver.

 The bit will eject from the coupler.

WARNING:

Do not drive a screw where there is likely to be hidden

wiring behind the surface. Contact with a “live” wire will

make exposed metal parts of the tool “live” and shock

the operator. If you must drive a screw where hidden wire

could be present, always hold tool by insulated gripping

surfaces (handle) when performing the operation to

prevent a shock to the operator.

CAUTION:

The impact driver is not designed to be used as a drill.

DRIVING OR REMOVING SCREWS

See Figures 5 - 6, page 11.

 Place the direction of rotation selector in the correct

position for the operation.

 Hold the impact driver with one hand.

 Place the bit on the screw head and slowly depress the

switch trigger. Start the bit slowly for more control.

NOTE: The TRI-BEAM LED will illuminate as the trigger is

depressed.

 As the screw is driven, impacting will begin.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comments to this Manuals

No comments

Ryobi P236 Use and Care Manual Page 9

Comments to this Manuals

Related products and manuals for Power impact wrenches Ryobi P236