Ryobi CDI-1801M Specifications download pdf (Page 25)

-22-

3. Reassembly of the gear unit

(a) Apply grease (Hitachi Motor Grease No. 29, Code No. 930035) to the meshing portions of each gear.

(b) Reassemble the parts of the gear unit in order. (See Fig. 8.)

(1) Position Spring (A) [16] (4 pcs.) and Steel Ball D5 [17] (4 pcs.) as illustrated in Fig. 9.

(2) Pay attention to the direction of the groove when mounting the Slide Ring Gear [25], so that the

groove faces toward the Motor [36].

(3) Mount the Front Case [15] and Rear Case [22] so that the positioning groove matches the rib.

(4) Fit Washer (B) [30] in the Rear Case [22] so that the protrusions of Washer (B) [30] fit into the

recesses on the Rear Case [22]. Then fully turn Washer (B) [30] clockwise until it stops.

(See Fig. 10.)

Steel Ball D5 [17]

Washer (A) [10]

Ring Gear [18]

Carrier [19]

Planet Gear (C) Set [20]

Washer (A) [21]

Spring (A) [16]

Rear Case [22]

Screw Set

D3 x 12 [23]

Shift Arm [24]

Slide Ring Gear [25]

Pinion (C) [26]

Planet Gear (A) Set [27]

Pinion (B) [28]

Planet Gear (A) Set [27]

First Ring Gear [29]

Washer (B) [30]

Groove

Fig. 8

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 44 45

No comments

Ryobi CDI-1801M Specifications Page 25