Ryobi SA960 Operator's Manual download pdf (Page 17)

Page 17

MAINTENANCE

WARNING:

When servicing use only identical Ryobi replacement

parts. Use of any other parts may create a hazard or

cause product damage.

Do not abuse power tools. Abusive practices can damage

tool as well as workpiece.

WARNING:

Do not at any time let brake fluids, gasoline, petro-

leum-based products, penetrating oils, etc. come in

contact with plastic parts. They contain chemicals that

can damage, weaken or destroy plastic.

WARNING:

Do not attempt to modify this tool or create accesso-

ries not recommended for use with this tool. Any such

alteration or modification is misuse and could result

in a hazardous condition leading to possible serious

personal injury.

GENERAL

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use.

Use clean cloths to remove dirt, carbon dust, etc. that can

damage, weaken, or destroy plastic.

WARNING:

Always wear eye protection marked to comply with

ANSI Z87.1. Failure to do so could result in dust, shav-

ings, or loose particles being thrown into your eyes,

resulting in possible serious injury.

CHUCK REMOVAL

See Figures 14, 15, and 16.

The chuck must be removed in order to use some acces-

sories. To remove:

■ Lock the switch trigger by placing the direction of

rotation selector in center position. See

Figure 4.

■ Insert a 5/16 in. or larger hex key into the chuck of the

drill and tighten the chuck jaws securely.

■ Tap the hex key sharply with a mallet in a clockwise

direction.

See Figure 14.

This will loosen the screw in

the chuck for easy removal.

Fig. 14

Fig. 15

Fig. 16

MALLET

KEYLESS CHUCK

CHUCK JAWS

HEX KEY

1 2 ... 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Ryobi SA960 Operator's Manual Page 17

Comments to this Manuals

Related products and manuals for Power drills Ryobi SA960