Ryobi TR31-1 User Manual download pdf (Page 4)

Page 4

WARNING:

Some dust created by power sanding, sawing, grinding,

drilling, and other construction activities contains

chemicals known to cause cancer, birth defects or

other reproductive harm. Some examples of these

chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to filter

out microscopic particles.

■ Make sure your extension cord is in good condition.

When using an extension cord, be sure to use one heavy

enough to carry the current your product will draw. A wire

gage size (A.W.G.) of at least 16 is recommended for an

extension cord 100 feet or less in length. A cord exceed-

ing 100 feet is not recommended. If in doubt, use the next

heavier gage. The smaller the gage number, the heavier

the cord. An undersized cord will cause a drop in line

voltage resulting in loss of power and overheating.

■ Drugs, Alcohol, Medication. Do not operate tool while

under the influence of drugs, alcohol, or any medication.

Following this rule will reduce the risk of electric shock,

fire, or serious injury.

■ Save these instructions. Refer to them frequently and

use them to instruct others who may use this tool. If you

loan someone this tool, loan them these instructions also.

GENERAL SAFETY RULES

SAVE THESE INSTRUCTIONS

Additional Rules for Safe Operation

■ Know your power tool. Read operator's manual care-

fully. Learn its applications and limitations as well as the

specific potential hazards related to this tool. Following

this rule will reduce the risk of electric shock, fire, or

serious injury.

■ Always wear safety glasses with side shields. Every-

day eyeglasses have only impact resistant lenses; they

are NOT safety glasses.

■ Protect your lungs. Wear a face or dust mask if the

operation is dusty.

■ Protect your hearing. Wear hearing protection during

extended periods of operation.

■ Hold tool by insulated gripping surfaces when per-

forming an operation where the cutting tool may

contact hidden wiring or its own cord. Contact with a

"live" wire will make exposed metal parts of the tool "live"

and shock the operator.

■ Inspect tool cords periodically and if damaged, have

repaired at your nearest authorized service center. Stay

constantly aware of cord location.

■ Check damaged parts. Before further use of the tool, a

guard or other part that is damaged should be carefully

checked to determine that it will operate properly and

perform its intended function. Check for alignment of

moving parts, binding of moving parts, breakage of parts,

mounting, and any other conditions that may affect its

operation. A guard or other part that is damaged should

be properly repaired or replaced by an authorized service

center. Following this rule will reduce the risk of electric

shock, fire, or serious injury.

■ Do not abuse cord. Never carry tool by cord or yank

it to disconnect from receptacle. Keep cord from

heat, oil and sharp edges. Following this rule will reduce

the risk of electric shock or fire.

■ Keep the tool and its handle dry, clean, and free from

oil and grease. Always use a clean cloth when clean

SPECIFIC SAFETY RULES

ng. Never use brake fluids, gasoline, petroleum-based

products, or any strong solvents to clean your

tool.

1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments

Ryobi TR31-1 User Manual Page 4

Comments to this Manuals

Related products and manuals for Gardening equipment Ryobi TR31-1