Your new trimmer has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. Properly cared f
10INSTALLING THE POWER HEAD TO THE ATTACHMENTSee Figure 2.WARNING:Never install, remove, or adjust any attachment while power head is runni
11ATTACHING THE FRONT HANDLE - CS30 AND SS30See Figure 4. Remove 2 wing nuts, 2 bolts, and clamp from the front handle. Install the front handle o
12ATTACHING THE GRASS DEFLECTOR WARNING:The line cutting blade on the grass deflector is sharp. Avoid contact with the blade. Failure to avoid contac
13ATTACHING THE SHOULDER HARNESS - BC30See Figure 9. Connect the latch on the shoulder harness to the strap hanger. Adjust the strap to a comf
14ASSEMBLYREMOVING THE STRAIGHT SHAFT GRASS DEFLECTOR AND STRING HEADSee Figures 10 - 13. Align the slot in the flanged washer with the slot in
15FUELING AND REFUELING THE TRIMMERFUEL MIXTUREThis product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle oil. Pre-mix u
16WARNING:Always hold the string trimmer away from the body keep-ing clearance between the body and the product. Any contact with the housing o
17 Inspect and clear the area of any hidden objects such as glass, rocks, concrete, fencing, wire, wood, metal, etc. Never use blades near sidew
18OPERATIONSTARTING AND STOPPINGSee Figures 21 - 23.TO START A COLD ENGINE:DO NOT squeeze the throttle trigger until the engine starts and runs. Lay
19MAINTENANCEFig. 24SPOOL RETAINERFig. 25SPRINGSLOTSSTRING HEADEYELETSSHAFT Remove the empty spool from the string head. Keep the spring attached to
2 Introduction ...
20To install the spool retainer: Turn the spool retainer clockwise for model CS30. Turn the spool retainer counterclockwise for models SS30 and BC30
21MAINTENANCECLEANING THE EXHAUST PORT AND MUFFLERNOTE: Depending on the type of fuel used, the type and amount of oil used, and/or your operating
22PROBLEM POSSIBLE CAUSE SOLUTIONIF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.TROUBLESHOOTING1. Check spark.
23PROBLEM POSSIBLE CAUSE SOLUTIONIF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.TROUBLESHOOTING1. Clean threads
24WARRANTYLIMITED WARRANTY STATEMENTTechtronic Industries North America, Inc., warrants to the original retail purchaser that this RYOBI® brand outdoo
25WARRANTYTECHTRONIC INDUSTRIES NORTH AMERICA, INC., LIMITED WARRANTY FEDERAL AND CALIFORNIA EMISSION CONTROL SYSTEMS NON-ROAD AND SMALL OFF-ROAD ENG
TECHTRONIC INDUSTRIES NORTH AMERICA, INC.1428 Pearman Dairy Road, Anderson, SC 29625Phone 1-800-860-4050www.ryobitools.com• SERVICENow that you have
3GENERAL SAFETY RULESWARNING:Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire
4SPECIFIC SAFETY RULESSPECIFIC SAFETY RULES FOR TRIMMER USE Replace string head if cracked, chipped, or damaged in any way. Be sure the stri
5SYMBOLS50' 15m50' 15mSome of the following symbols may be used on this tool. Please study them and learn their meaning for safe operation o
6SYMBOLSSERVICEServicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we sugg
7FEATURESPRODUCT SPECIFICATIONSWeight - (without fuel) CS30 ...
8FEATURESFig. 1bFig. 1cTHROTTLE TRIGGER FRONT HANDLECOUPLERDRIVE SHAFT HOUSINGSTRING HEADSTRAIGHT SHAFT GRASS DEFLECTORTHROTTLE TRIGGER“J” HANDLECOUPL
9ASSEMBLYFEATURESKNOW YOUR STRING TRIMMERSee Figures 1a - 1c.Before attempting to use this product, familiarize yourself with all operating features a
Comments to this Manuals