Ryobi CTH1202K2 Service Manual

POWER TOOLSTECHNICAL DATAANDSERVICE MANUALCORDLESS DRIVER DRILLFDS 12DVASPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENTLIST N

--- 7 ---CAUTION Read thoroughlyHANDLING INSTRUCTIONSbefore use. Do not disassemble nor throw into fire.CAUTION TRES IMPORTANT : Lire avec attentio

--- 8 ---8-2. Inherent Drawbacks of Cordless Driver Drills Requiring Particular Attention During Sales PromotionThe cordless driver drill offers many

--- 9 ---(6) Precautions in the use of HSS Drill BitsAlthough the Model FDS 12DVA is designed for drilling capacities of 21 mm (13/16") in wood,

--- 10 ---10. REPAIR GUIDEBe sure to remove the storage batteries from the main body before servicing. Inadvertent triggering of the switchwith the s

--- 11 ---(4) Disassembly of the gear unitRemove the Shift Arm [16] from the Rear Case [14], then remove the four Screws Set D3 x 12 [15] connectingth

--- 12 ---Fig. 5Motor Spacer [24]Motor [25]Internal Wire (Red) [33]Machine ScrewM3 x 8 [29]Spring Washer M3 [30]Internal Wire (Red) [33]InternalWire (

--- 13 ---(b) Mount the Nut [5] to the Front Case [9]. (See Fig. 8.)Align the register mark (o) on the Nut [5] with the register mark on the Front Ca

--- 14 ---(iii) Install Washer (B) [23] in the Rear Case [14] with the projections of Washer (B) [23] engaged with therecesses in the Rear Case [14],

--- 15 ---(e) Install the Drill Chuck [2].Install the Drill Chuck [2] using the special repair tool (J-292, Code No. 316379) and secure it with theSpe

--- 16 ---Fig. 14(c) Set the assembly reassembled in step (b) to Housing (B) [31] and secure it with the seven Tapping Screws(W/Washers) D3 x 16 [26].

REMARK:Throughout this TECHNICAL DATA AND SERVICE MANUAL, a symbol(s)is(are) used in the place of company name(s) and model name(s)

--- 17 ---11. STANDARD REPAIR TIME (UNIT) SCHEDULESMODEL 10 20 30 40FixedVariableFDS12DVAWork FlowHousing(A).(B) SetMotorCapDC-SpeedControl SwitchNutS

--- 18 ---Assembly Diagram for FDS 12DVA

--- 19 ---PARTSFDS 12DVA: ALTERNATIVE PARTSITEMNO.CODE NO. DESCRIPTIONNO.USEDREMARKS1 318-228 SPECIAL SCREW (LEFT HAND) M5X35 12 312-516DRILL CHUCK 10

--- 20 ---STANDARD ACCESSORIESFDS 12DVAITEMNO.CODE NO. DESCRIPTIONNO.USEDREMARKS501 CHARGER (MODEL UC 12SD) 1502 318-236 + DRIVER BIT NO.2 55L 1* 503

Notice for useSpecifications and parts are subject to change for improvement.Refer to Hitachi Power Tool Technical News for further information.PageCO

--- 1 ---1. PRODUCT NAMEHitachi 12 V Cordless Driver Drill, Model FDS 12DVA2. MARKETING OBJECTIVESince the sales initiation of economically priced co

--- 2 ---4-1. Selling Point Descriptions4-1-1. 22-Position Adjustable Torque SettingThe number of clutch positions has been increased from the previou

--- 3 ---5. SPECIFICATIONSScrewdriver Machine screw ••••••••6 mm (1/4")Wood screw ••••••••••••5.5 x 63 mm (#12 x 2-1/2")Drill Metal ••••••Mi

--- 4 ---6. COMPARISONS WITH SIMILAR PRODUCTSCatalog specificationsMakerModelMax. capacityBatteryScrewdrivingMachine screwWood screwMild steelAluminum

--- 5 ---7. WORKING PERFORMANCE PER SINGLE CHARGEDrilling and fastening performance comparison per chargeRemarks* Number of machine screws fastened pe

--- 6 ---8. PRECAUTIONS IN SALES PROMOTION8-1. Safety InstructionsIn the interest of promoting the safest and most efficient use of the Model FDS 12DV