Ryobi RP4011 User Manual download pdf

OPERATOR’S MANUAL

Tek4® Lithium-ion

4V Laser Distance Measure

RP4011

WARNING:

READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow

all instructions listed below, may result in electric shock, fire and/or

serious personal injury.

WARNING:

Use of controls or adjustments or perfor mance of procedures

other than those specified herein may result in hazardous radiation

exposure.

The laser guide radiation used in the laser distance measure

attachment is Class II with < 1mW and 630-660nm wavelengths.

Avoid direct eye exposure when using the laser and do not project

the laser beam directly into the eyes of others. Serious eye injury

could result.

Do not remove or deface any prod uct labels. Removing product

labels increases the risk of exposure to laser radiation.

Do not place the instrument in a position that may cause anyone

to stare into the laser beam intentionally or unintention ally. Seri-

ous eye injury could result.

Do not operate the laser distance measure around children or

allow children to operate the tool. Serious eye injury could result.

Always turn the laser distance measure off when not in use. Leav-

ing the tool on increases the risk of someone inadvertently staring into

the laser beam.

 Use the laser distance measure only as a measurement device.

Do not operate the instrument in com bustible areas such as in

the presence of flammable liquids, gasses, or dust.

Always ensure the laser beam is aimed at a surface without reflec-

tive proper ties. Shiny reflective materials are not suitable for laser use.

 The laser shall be used and maintained in accordance with the

manufacturer’s instructions.

 Neveraimthebeamatapersonorobjectotherthanthetarget

surface.

This product should not be used without the battery cover installed.

Handle the instrument with care. Treat it as you would any other

optical device such as a camera or binoculars.

Avoid exposing the instrument to shock, continuous vibration, or

extreme hot or cold temperatures. Damage to the product and/or

serious injury to the user could result.

Use battery only with charger listed.

MODEL BATTERY PACK CHARGER

RP4011 AP4001 AP4700, AP4500

Do not use on a ladder or unstable support. Stable footing on a

solid surface enables better control of the product in unexpected

situations.

IMPORTANT SAFETY INSTRUCTIONS

Do not use the product if the ON/DIST KEY does not turn it on

and off.

Use the product in accordance with these instructions and in the

manner intended for the product, taking into account the working

conditions and the work to be performed. Use of the product for

operations different from those intended could result in a hazardous

situation.

Recharge only with the charger specified by the manufacturer. A

charger that is suitable for one type of battery pack may create a risk

of fire when used with another battery pack.

Use battery products only with specifically designated battery

packs. Use of any other battery packs may create a risk of injury and

fire.

When servicing a battery product, use only identical replacement

parts. Follow instructions in the Maintenance section of this

manual. Use of unauthorized parts or failure to follow Maintenance

instructions may create a risk of shock or injury.

Know your battery product. Read operator’s manual carefully.

Learn its applications and limitations, as well as the specific

potential hazards related to this battery product. Following this

rule will reduce the risk of electric shock, fire, or serious injury.

Do not place battery products or their batteries near fire or heat.

This will reduce the risk of explosion and possibly injury.

 Do not crush, drop or damage battery pack. Do not use a bat-

tery pack or charger that has been dropped or received a sharp

blow. A damaged battery is subject to explosion. Properly dispose

of a dropped or damaged battery immediately.

Batteries can explode in the presence of a source of ignition, such

as a pilot light. To reduce the risk of serious personal injury, never

use any cordless product in the presence of open flame. An exploded

battery can propel debris and chemicals. If exposed, flush with water

immediately.

Do not charge battery tool in a damp or wet location. Following

this rule will reduce the risk of electric shock.

For best results, your battery tool should be charged in a location

where the temperature is more than 50°F but less than 94°F. To

reduce the risk of serious personal injury, do not store outside or in

vehicles.

Under extreme usage or temperature conditions, battery leak-

age may occur. If liquid comes in contact with your skin, wash

immediately with soap and water. If liquid gets into your eyes,

flush them with clean water for at least 10 minutes, then seek

immediate medical attention. Following this rule will reduce the risk

of serious personal injury.

Save these instructions. Refer to them frequently and use them to

instruct others who may use this product. If you loan someone this

instrument, loan them these instructions also.

SYMBOLS

The following signal words and meanings are intended to explain the levels of

risk associated with the product.

SYMBOL / SIGNAL

MEANING

DANGER:

Indicates an imminently hazardous situation, which, if not

avoided, will result in death or serious injury.

WARNING:

Indicates a potentially hazardous situation, which, if not

avoided, could result in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation, which, if not

avoided, may result in minor or moderate injury.

CAUTION:

(Without Safety Alert Symbol) Indicates a situation that

may result in property damage.

LASER DISTANCE MEASURE

IMPACT/DUST/WATER RESISTANT

1 2 3 4 5 6 ... 15 16

Summary of Contents

Page 1 - IMPORTANT SAFETY INSTRUCTIONS

OPERATOR’S MANUALTek4® Lithium-ion 4V Laser Distance MeasureRP4011WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions li

Page 2 - OPERATION

10ARMADOCARACTERÍSTICASESPECIFICACIONES DEL PRODUCTOVoltaje del paquete de baterías ... 4 V c.c.Cer

Page 3 - OPERATION OPERATION

11 Para retirar el paquete de la batería, retire la tapa y tire del paquete de la batería para sacarlo del instrumento. No intente usar este produ

Page 4

12CALIFORNIA - PROPUESTA DE LEY NÚM. 65ADVERTENCIA: Este producto puede contener sustancias químicas (por ejemplo, plomo) reconocidas por el estado de

Page 5 - SYMBOLES

13IMPACT/DUST/WATER RESISTANTLASER DISTANCE MEASUREinIMPACT/DUST/WATER RESISTANTLASER DISTANCE MEASUREininLASER DISTANCE MEASUREIMPACT/DUST/WATER RESI

Page 6 - UTILISATION

14A - First measurement (première mesure, primera medición)B - Summary line (ligne de résumé, renglón de resumen)ABFig. 6TAKING MEASUREMENTS PRISE DE

Page 7 - UTILISATION UTILISATION

15NOTES / NOTAS

Page 8 - ENTRETIEN

16REPLACEMENT PARTS: Prior to purchasing replacement parts, please obtain your model and serial number from the product data plate.MODEL NUMBER: _____

Page 9 - IMPORTANTES

2FEATURESPRODUCT SPECIFICATIONSBattery Pack Voltage ... 4 V DCLaser Certifications ...

Page 10 - SIMBOLOS

3OPERATION OPERATIONDo not attempt to use this product if the battery cover is not securely closed.TURNING THE INSTRUMENT AND LASER ON/OFFSee Figure

Page 11 - FUNCIONAMIENTO FUNCIONAMIENTO

4CALIFORNIA PROPOSITION 65WARNING:This product may contain chemicals, including lead, known to the State of California to cause cancer, birth defects,

Page 12 - GARANTÍA

5AVERTISSEMENT : LIRE TOUTES LES INSTRUCTIONS. Le non-respect de toutes les instructions ci-dessous peut entraîner un choc électrique, un incendie et/

Page 13 - IMPACT/DUST/WATER RESISTANT

6CARACTÉRISTIQUESFICHE TECHNIQUETension du blocs-piles ...4 V c.c.Certification de la

Page 14

7UTILISATION UTILISATIONSUIVI DES DONNÉESVoir la figure 7, page 14.Le message de suivi des données s’affiche en bas de casse (« trc ») dans l’afficheu

Page 15 - NOTES / NOTAS

8RECHERCHE DE PANNESCAUSE MESURE CORRECTIVE204 Erreur de calcul Répéter la procédure252 Température trop élevée Laisser le dispositif refroidir253 Tem

Page 16 - 9-23-11 (REV:04)

9MANUAL DEL OPERADORTek4® de iones de litio de 4v medidor de distancia láserRP4011ADVERTENCIA: LEA TODAS LAS INSTRUCCIONES. El incumplimiento de las

Comments to this Manuals

No comments

Ryobi RP4011 User Manual

Browse online or download User Manual for Headphones Ryobi RP4011. Ryobi RP4011 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Headphones Ryobi RP4011